Hitachi Global Link Manager Software Installation and Configuration Guide

6. Execute the following command:
drive-in-which-the-installation-DVD-ROM-is-set:\HGLM\Agent
\Windows\HGLMAgent_tools\setup.exe [/s] [/fname-of-the-
installation-information-settings-file] [/h] [INSTALL_PATH=path-
name]
You can specify the following options in the installhglm command.
Table 7-5 setup.exe Command Options
Item Description
/s
Specify this option to suppress the output of a
message asking for confirmation of the
requested operation.
/finstallation-information-settings-
file
Use an absolute path to specify the location
where the installation-information settings file
is stored.
For details on this file, see Information Settings
File for Global Link Manager Agent Installation
on page 7-15.
Specification example:
/fC:\tmp\installhglm.ini
/h
Display the format of the setup.exe command.
If this option is specified with other options,
only this option will be valid.
INSTALL_PATH=path-name Specify where to install the Global Link
Manager agent. If this is omitted, the Global
Link Manager agent is installed in the default
path.
Executing the command starts the installation.
After the installation finishes successfully, the message KAIF62002-I will
be output. If it is not output, follow the instructions provided by the
messages that are output.
Editing the Global Link Manager agent properties files
If necessary, edit the Global Link Manager agent properties files after
installing the Global Link Manager agent.
If the value specified for the property that specifies the DMP storage
destination (agent.dmp.location) does not match the execution
environment, change the value. Change other items in the properties files as
required.
For details about the properties files, see
Global Link Manager Agent
Properties Files on page 7-10.
7-6
Settings for Using DMP or HP-UX Multipathing
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)