Hitachi Global Link Manager Software Installation and Configuration Guide

Removing the Global Link Manager Agent from Solaris or HP-UX
Environments
By specifying an option for the Global Link Manager agent removal command,
you can perform an unattended removal, where you do not need to respond
to prompts during the removal.
To remove the Global Link Manager agent:
1. Login with root permissions.
2. Execute the following command to start removal.
# Global-Link-Manager-Agent-installation-directory/
bin/.uninstall.sh
By specifying the command option -s, you can perform an unattended
removal. The command syntax is as follows:
# Global-Link-Manager-Agent-installation-directory/
bin/.uninstall.sh -s
If you want to specify the -s option, go to step 4.
3. When the removal start message is displayed, enter y to start the
processing, and then press the Enter key.
4. After the message indicating completed removal is displayed, execute the
following command to confirm that the Global Link Manager agent was
successfully removed:
In Solaris:
# pkginfo -l HGLMAgent
In HP-UX:
# swlist HGLMAgent
Make sure that a message is displayed indicating that Global Link
Manager agent information could not be found.
Changing Global Link Manager Agent Environment Settings
To change the Global Link Manager agent environment settings, edit the
properties files. The subsequent sections describe the properties files used by
the Global Link Manager agent and the contents of the information settings
file for Global Link Manager agent installation.
Global Link Manager Agent Properties Files
The following table lists the types of properties files used by the Global Link
Manager agent and their storage locations.
7-10
Settings for Using DMP or HP-UX Multipathing
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)