Hitachi Global Link Manager Software Installation and Configuration Guide

Table 7-9 Properties File for DMP Host Settings or HP-UX Multipathing
Host Settings (host.properties)
No. Property name Contents
1
snmp.shutdown_port_num
Specifies a port number to which a stop request
for canceling an alert generation processing is
sent.
Specifiable value: 1 to 65535
Default: 23036
This value is used to stop the HGLM SNMP
daemon. Therefore, do not modify the value
while the daemon is running.
Table 7-10 Properties File for SNMP Trap Log File Output on a DMP Host or
an HP-UX Multipathing Host (snmplogger.properties)
No. Property name Contents
1
snmp.logger.log_level
Specifies the output level (threshold value) for
SNMP trap log files on DMP or HP-UX
multipathing hosts.
Specifiable value: 0, 10, 0, or 30 (in order of
importance from left to right)
#
Default: 20
2
snmp.logger.max_backup_ind
ex
Specifies the maximum number of SNMP trap
log files on DMP or HP-UX multipathing hosts to
be backed up.
Specifiable value: 1 to 20
Default: 10
3
snmp.logger.max_file_size
Specifies the maximum size of SNMP trap log
files on DMP or HP-UX multipathing hosts. The
value can be specified in bytes, KB, and MB. If
you specify only numerals but not a unit, the
unit is assumed to be bytes.
Specifiable value: 512 KB to 32 MB
Default: 5MB
#
The output levels of log files and the contents of the output messages are
as follows:
0: Critical error, high-priority information
10: Non-critical error, medium-priority information
20: Warning
30: All debug information
7-14
Settings for Using DMP or HP-UX Multipathing
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)