Hitachi Global Link Manager Software Installation and Configuration Guide

Options and arguments Description
• When the /type option is specified:
13 bytes
• When the /type option is not
specified: 71 bytes
/type HGLAM
or GlobalLinkAvailabilityManager
Specifies that only Global Link Manager
diagnostic information be collected. If this
option is not specified, the command also
collects diagnostic information about the
other Hitachi Command Suite products
installed on the same server.
/arc archive-file-name Specifies the name of the archive file in
which collected information will be stored.
If this option is not specified, the
command creates the archive files with
the default names shown in Table 8-4
Information Collected by the
hcmds64getlogs Command on page 8-7.
The archive file is output to the folder
specified for the /dir option.
Characters that can be used:
You can use A to Z, a to z, 0 to 9, period
(.), and underscore (_).
If you use a character not listed above, a
message is output and the command is
terminated.
/logtypes log-file-type[ log-file-type ...] Specify the types of log files to acquire
when log files of a particular type cannot
be collected due to a failure.
log: Specify this to acquire .jar files
and .hdb.jar files only.
db: Specify this to acquire .db.jar files
only.
csv: Specify this to acquire .csv.jar files
only.
To specify multiple types, separate them
by a space.
If you omit this option, all log files will be
acquired.
Notes
If the KAPM05318-I or KAPM05319-E message is not output after the
hcmds64getlogs command is executed, the command did not complete
because sufficient free space was not available for the folder specified in
the /dir option. Free up sufficient space in the folder, and then re-execute
the hcmds64getlogs command.
Troubleshooting Global Link Manager
8-9
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)