Hitachi Global Link Manager Software Installation and Configuration Guide

No. Property Name Description
are disregarded without any errors for IP
addresses using decimal numbers with dots.
In the following example, the specification
permits 191.0.0.2 and 192.168.0.0 to
192.168.255.255 to connect to the Hitachi
Command Suite Common Agent
Component:
server.http.security.clientIP=191.0.0
.2, 192.168.*.*.
The following gives an example for
permitting 2001::203:baff:fe36:109a and
2001::203:baff:fe5b:7bac:
server.http.security.clientIP=2001::2
03:baff:fe36:109a,
2001::203:baff:fe5b:7bac
Default: No specification (all IP addresses
can be connected).
11
server.http.entity.maxLength
Specifies the maximum length (in bytes) of
an XML file that the Global Link Manager
server sends to Hitachi Command Suite
Common Agent Component. If an error
occurs during sending of a large XML file,
such as for changing the statuses of many
paths concurrently, increasing this value
might correct the problem.
Default: 32768
#
Avoid specifying small port numbers for each property because such
numbers might conflict with other services (or daemon process). The
normal range is 1024 to 49151.
Note: Default value properties might not be coded in the property file in the
initial status after installation. To change the default setting, add the property
in the property-name=value format.
Table A-2 Properties for Changing the Settings of Hitachi Command Suite
Common Agent Component Log File (logger.properties)
No. Property Name Description
1
logger.loglevel
Specifies the log level for data that the
Hitachi Command Suite Common Agent
Component outputs to the files error.log
and trace.log. When the default value is
used, INFO, WARN, ERROR, and FATAL
entries are output to the log but DEBUG
entries are not.
Log levels: DEBUG, INFO, WARN, ERROR,
and FATAL.
Default: INFO
Notes on Using HDLM Version 5.8 or Later, DMP, or HP-UX Multipathing
A-9
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)