Hitachi Global Link Manager Software Installation and Configuration Guide

Applicable OS DMP version Prerequisite program
Windows Server 2003 R2 (x86)
(SP2)
(Datacenter Edition, Enterprise
Edition, Standard Edition)
Windows Server 2008 (IPF) (no
SP)
Windows Server 2008 (x64) (no
SP)
(Datacenter, Enterprise, Standard)
Windows Server 2008 (x86) (no
SP)
(Datacenter 32-bit, Enterprise 32-
bit, Standard 32-bit)
Solaris9 (SPARC) DMP 5.0 (MP3) • Global Link Manager
agent 6.2 or later
• JRE 1.4.2 or JRE 5.0
Solaris10 (SPARC)
#
#
The Global Link Manager agent only runs in the global zone.
For details about DMP environment settings, see the VxVM documentation.
For details about the installation and environment settings of the Global Link
Manager agent, see
Chapter 7, Settings for Using DMP or HP-UX Multipathing
on page 7-1.
When Using HP-UX Multipathing
The requirement for HP-UX multipathing supported by Global Link Manager is
as follows:
•
HP-UX 11i v3 (IPF)
#
#
HP-UX running on a virtual machine is not supported.
For details about HP-UX multipathing environment settings, see the HP-UX
documentation. For details about the installation and environment settings of
the Global Link Manager agent, see
Chapter 7, Settings for Using DMP or HP-
UX Multipathing on page 7-1.
Operating in an IPv6 Environment
Global Link Manager supports IPv6 environments. For details about the OSs
on which Global Link Manager supports IPv6 environments, see
Global Link
Manager System Requirements on page 1-7.
Global Link Manager System Configuration and Requirements
1-15
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)