Hitachi Global Link Manager Software Installation and Configuration Guide

¢
The path name must not contain any names reserved by the OS (CON,
AUX, NUL, PRN, CLOCK$, COM1 to COM9, and LPT1 to LPT9).
The following is the default database storage destination for the Hitachi
Command Suite products:
specified-installation-folder-for-Hitachi-Global-Link-Manager\databackup
6. Click the Next button.
The Setup of Information about the Server of Hitachi Global Link
Manager dialog box appears.
Specify the following information (confirm the information before you
start installation):
¢
IP address or host name of the server
¢
Port number for HBase 64 Storage Mgmt Web Service
¢
Enabling or disabling reception of an SNMP trap
When you install Global Link Manager in an environment in which no
other Hitachi Command Suite product has been installed, the
automatically detected IP address is displayed as the IP address or host
name of the server. If nothing is displayed, enter the IP address or host
name of the server. When specifying an IPv6 address, enclose the IP
address in square brackets ([ ]).
If another Hitachi Command Suite product has already been installed, the
fields for the following information are disabled:
¢
IP address or host name of the server
¢
Port number for HBase 64 Storage Mgmt Web Service
Note:
¢
In some network environments, the host might have multiple IP
addresses. If the host has multiple IP addresses, the first detected IP
address is displayed. Make sure that the detected IP address is
correct.
¢
The host name must be no more than 128 bytes. You can use the
following characters:
A to Z, a to z, 0 to 9, period (.), -
Note that the host name cannot start or end with a hyphen (-).
7. Click the Next button.
If you have enabled the SNMP trap receiving function, the SNMP Trap
Connection Settings for Hitachi Global Link Manager dialog box
appears. If you have disabled this function, go to step 8.
Specify the following information (check the information before you start
installation):
¢
IP address for receiving SNMP traps (IPv4 address or IPv6 address)
¢
Port number for receiving SNMP traps
The IP address of the Global Link Manager server is displayed as the IP
address for receiving SNMP traps. If nothing is displayed, enter the IP
address of the server.
2-8
Installing Global Link Manager
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)