Hitachi Global Link Manager Software Installation and Configuration Guide

No. Property Name Description
Specifiable value: Character string
Default: None (The information is
acquired in the order of the date in
the file name from oldest to newest.)
47
getlogs.pathreport.endDate
Specifies the end date for acquisition
of the path availability information
(path status log), as the Global Link
Manager diagnostic information
#5
.
Specify a date in the yyyymmdd
format.
This value takes effect only when the
value set for
getlogs.pathreport.get_mode is 2.
Specifiable value: Character string
Default: None (The information is
acquired up to the file that has the
most recent date in the file name.)
48
server.hdvm.polling.time
Specifies the time for acquisition of
LDEV label information. Specify a
date in the hh:mm:ss format.
This value takes effect only if the
value set for
server.hdvm.ldevlabel.acquisiti
on.enable is true.
Specifiable value: 00:00:00 to
23:59:59 (hours, minutes, seconds)
Default: None
49
server.hdvm.http.ipaddr
Specifies the IP address of the
Device Manager server from which
LDEV label information is acquired,
as well as the HTTP port number
#6
used by the Device Manager server
(2001 by default).
Either an IPv4 address or IPv6
address can be specified. When
specifying an IPv6 address, enclose
the IP address in square brackets
([ ]).
Specify the port number after the IP
address by separating them by a
colon.
You can specify the Device Manager
servers of a maximum of 10 hosts.
To specify multiple Device Manager
servers, separate them by commas.
For example, specify an IPv4 address
Device Manager server and an IPv6
address Device Manager server as
two hosts as follows:
10.208.999.01:2001,[::128]:2001
3-36
Setting Up Global Link Manager
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)