Hitachi Global Link Manager Software Messages

Message ID Message Text Description
exauth.properties, and check
the settings of the external
authentication server and the
status of the network.
2. Use the hcmds64ldapuser
command to confirm that the
information for the server names
specified for the
auth.server.name attribute in
exauth.properties is registered.
3. If StartTLS is used, check the SSL
settings.
4. If an OCSP is enabled, make sure
that the certificate is valid.
5. If the problem cannot be resolved,
detailed investigation is required
to determine the cause and
resolve the problem. Contact the
Support Center, who may ask you
to collect troubleshooting
information.
For RADIUS:
1. Confirm whether the
authentication server can be
accessed by using the host, port,
and protocol set in
exauth.properties, and check
the settings of the external
authentication server and the
status of the network.
2. Use the hcmds64radiussecret
command to confirm that the
information for the server names
specified for the
auth.server.name attribute in
exauth.properties is registered.
3. If the problem cannot be resolved,
detailed investigation is required
to determine the cause and
resolve the problem. Contact the
Support Center, who may ask you
to collect troubleshooting
information.
KAPM02414-I Authentication with an external
authentication server was
successful. (user ID = aa...aa,
host = bb...bb, port = cc...cc,
protocol = dd...dd)
aa...aa: User ID
bb...bb: Host
cc...cc: Port
dd...dd: Protocol
The login user was successfully
authenticated on the external
authentication server.
5-50
Messages with IDs Beginning with KAPM
Hitachi Global Link Manager Messages