Hitachi Global Link Manager Software Messages

Message ID Message Text Cause Solution
KAIF20394-E An attempt to
disable the
path has failed,
as it is the last
path to the
disk/LUN
(return code =
Return code
from Agent
component)
An attempt to disable the path
failed as it is the last Enabled
path for disk/LUN.
Check the path status
and re-execute the
same operation.
If the problem still
persists, collect the
diagnostic information
and contact the
Support Center.
KAIF20395-E An error
occurred
during the path
enable
operation.
(return code =
Return code
from Agent
component)
An error occurred during
enable processing of the path.
Check path status and
re-execute the same
operation.
If the problem still
persists, collect the
diagnostic information
and contact the
Support Center.
KAIF20396-E An error
occurred
during the path
disable
operation.
(return code =
Return code
from Agent
component)
An error occurred during
disable processing of the path.
Check the path status
and re-execute the
same operation.
If the problem still
persists, collect the
diagnostic information
and contact the
Support Center.
KAIF20397-E Failure to
obtain HDvM
version
information.
(HDvM : IP
address of the
Device
Manager return
code : Return
code obtained
from the
Device
Manager)
An error occurred while
obtaining the HDvM Version
from HDvM
Check the reason for
the failure in obtaining
HDVM version from
HDVM and wait for the
LDEV Label acquisition
to be performed at the
next scheduled time.
KAIF20398-E An HDvM
operation
failed. (HDvM :
The Device
Manager IP
Address
details : Error
details
obtained from
the Device
Manager)
An unknown error occurred in
communicating with Device
Manager.
Check the reason for
Device Manager
communication failure
and wait for the LDEV
Label acquisition to be
performed at the next
scheduled time..
KAIF20400-E An error
occurred while
An error was detected while
setting the alert.
Make sure that HDLM
and Hitachi Command
4-52
Messages with IDs Beginning with KAIF
Hitachi Global Link Manager Messages