HP XP7 Business Continuity Manager Installation Guide (TK954-96002)

LOGR: BCM logs are output using the system
logger service.
SAM: BCM logs are output to sequential datasets.
SYSLOG=[YES | CONSOLE | NO] Specify whether or not CLI
command-execution logs are output to
SYSLOG or the console.
The value specified for the SYSLOG
parameter is given priority over the
&YKSYSLG system symbol in the
IEASYMxx parmlib member. If this
command is executed with the SYSLOG
parameter omitted (PARM='SYSLOG=' is
specified), the value of the &YKSYSLG
system symbol will be used.
YES: CLI command-execution logs are
output to SYSLOG.
CONSOLE: CLI command-execution logs
are output to the console.
NO: CLI command-execution logs are not
output to SYSLOG.
For details about commands that collect
CLI command-execution logs, see the HP
for XP7 Business Continuity Manager User
Guide.
NOTE: For the output of CLI
command-execution logs in an
environment where multiple versions of
Business Continuity Manager exist, see
“Specifying whether to output the CLI
command-execution logs (SYSLOG)”
(page 105)
To determine whether CLI
command-execution logs are output to
SYSLOG when multiple versions are used,
see “Specifying whether to output the CLI
command-execution logs (SYSLOG)”
(page 105).
Return codes
Table 17 YKSETENV command return codes list
MeaningReturn code
Successful completion.0
The specified value is incorrect. Another value was used for execution.4
The specified value is incorrect. Processing was cancelled.8
Processing was cancelled due to a system error (such as a GETMAIN error).12
An internal error occurred.16
36 Installing Business Continuity Manager