HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 45 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKZ41x) (continued)
Explanation and recommended actionsMessage textMessage ID
SUPFnc (hexadecimal number)
Value for the version of the
storage system support function
used in the copy group (minimum)
1
The CAJ ATTIME suspend function can be used in
a storage system where the version of the storage
system support function are X'14' or higher.
The timestamp transfer mode cannot be used with
this storage system.
Copygroup SUPFnc does not support
the timestamp transfer mode.
YKZ413E MSG SC=36
RC=36
1
Use a device
2
that supports the timestamp transfer
mode. Also, if scanning was not performed after the
storage system microcode was replaced, perform
another scan.
SUPFnc (hexadecimal number)
Value for the version of the
storage system support function
used in the copy group
1
If this message is output while the YKLOAD
command is being executed, the RC is 44.
2
The timestamp transfer mode can be used for the
storage system models listed below.
• XP12000/XP10000 disk arrays
Version of the storage system support function:
X'16' or higher
• XP24000/XP20000 disk arrays
Version of the storage system support function:
X'21' or higher
The function indicated by parameter-name cannot
be used.
Copygroup SUPFnc does not
support parameter-name.
YKZ414E MSG SC=36
RC=48
1
Use a device
2
that supports the parameter-name
function or configuration. Also, if scanning was not
performed after the storage system microcode was
replaced, perform another scan.
SUPFnc (hexadecimal number)
Value for the version of the
storage system support function
used in the copy group
parameter-name
Function or configuration that
cannot be used:
• UR_CTTIMEMODE: Consistency
time mode for Cnt Ac-J Z
• TC_OPENMF: Open/MF
Consistency Preservation
Function for Cnt Ac-S Z
• LinkageOption=HS: 2DC
configuration with HyperSwap
and Cnt Ac-J Z
• AttimeSplitMode=QUICK:
Quick suspend mode for the
CAJ ATTIME suspend function
162 Messages