HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 55 Details of error codes 50xx – 6Exx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
contains invalid information, or a
specified value is out of the
supported range.
Not
output
OutputNot outputThe setting or status acquisition
command for THP could not be
6EC2
executed because of either of the
following reasons:
• The volume or pool ID that was
specified does not exist.
• The attribute of the pool that
belongs to the target device is
not THP.
Not
output
OutputNot outputThe setting or status acquisition
command for THP could not be
6EC3
executed due to a parametric
error.
Not
output
OutputNot outputThe setting or status acquisition
command for THP could not be
6EC4
executed because of either of the
following reasons
• The specified serial number
and the serial number of the
target storage system do not
match.
• The specified CU number and
the CU number of the target
device do not match.
• The specified volume number
and the volume number of the
target device do not match.
• The target device does not
exist.
The setting or status acquisition
command could not be executed
because an invalid SSID was
specified for the command for
THP.
Not
output
OutputNot outputThe setting or status acquisition
command could not be executed
6EC5
because an invalid storage system
serial number was specified for
the command for THPz.
Not
output
OutputNot outputThe setting of the pool for THPz
that was specified by the pool ID
6EC6
failed for one of the following
reasons:
• An attempt to change the
attribute of the pool for THPz
failed.
• An attempt to change the
tiering relocation status (to start
Details of error codes 205