HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 57 Details of error codes 8Dxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputThe command cannot be executed
because the volume specified as
8D42
a command device is a volume
used in the open system.
Not outputOutputNot outputThe command could not be
executed because the logical
8D43
volume of the specified volume is
blocked.
Not outputOutputNot outputThe command could not be
executed because the specified
volume has PIN data.
8D44
Not outputOutputNot outputThe command device cannot be
defined. The reason might be one
of the following:
8D45
• The corresponding volume is
executing a remote control
command as a command
device.
• The corresponding volume is
part of a CA or CAA copy
pair.
Not outputOutputNot outputThe command device cannot be
deleted. The reason might be one
of the following:
8D46
• The corresponding volume is
executing a remote control
command as a command
device.
• The corresponding volume is
part of a CA or CAA copy
pair.
Not outputOutputNot outputThe command could not be
executed because the specified
volume is a BC volume.
8D47
Not outputOutputNot outputThe command could not be
executed because the specified
volume does not exist.
8D4D
Not outputOutputNot outputA command device cannot be
defined because it differs from the
APID that was already registered.
8D4E
Not outputOutputNot outputThe command could not be
executed because the specified
volume is online.
8D4F
OutputNot outputThe host command parameter is
incorrect.
8D50
Not outputOutputNot outputThe command could not be
executed because the logical
8D51
volume of the specified volume is
blocked or the specified volume
is in the NOT READY status.
214 Storage system sense byte information