HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 60 Details of error codes C1xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputThe command could not be
executed because the
C12A
device-identifying code of an
RCU for which path deletion is
specified is invalid, or because
the RCU type (FIBRE/ESCON) is
invalid.
Not outputOutputNot outputThe command could not be
executed because there are one
C12B
or more paths that have a
different serial number.
Not outputOutputNot outputThe command could not be
executed because automatic port
C12C
switching cannot be performed
for the specified path.
Not outputOutputNot outputThe command could not be
executed because the
C12D
device-identifying code of an
RCU for which path registration
is specified is invalid, or
because the RCU type
(FIBRE/ESCON) is invalid.
Not outputOutputNot outputThe command could not be
executed because all CU
C12E
numbers of an RCU for which
path creation or deletion is
specified are not the same.
Not outputOutputNot outputThe command cannot be
executed. The reason might be
one of the following:
C12F
• The specified CU number is
not defined.
• An LDEV is not defined for
the specified CU number.
Not outputOutputNot
output
A copy pair cannot be
resynchronized because the
C162
corresponding bootup pair is not
in the suspend status.
Not outputOutputNot
output
A copy pair cannot be dissolved
because an attempt to change
the S-VOL status failed.
C184
Not outputOutputNot
output
A CA or CAA copy pair cannot
be dissolved because the copy
pair status is invalid.
C189
Not outputOutputNot
output
The copy pair cannot be
dissolved. The reason might be
one of the following:
C18A
• The status of the bootup
volume is being changed.
• There is a copy pair in the
group that has a status that
is being changed.
Details of error codes 225