HP XP7 Business Continuity Manager Messages (TK954-96003)

ManualsBrandsHP ManualsComputer AccessoriesHP P9500 Disk Array DKC Module-0 Controller Rack

Table 60 Details of error codes C1xx (continued)

Type of errorError detailsError

code

OthersTHPzPATHCMDCAJCAACABC

Not outputOutputNot

output

A copy pair cannot be

suspended because the S-VOL

status is being changed.

C194

Not outputOutputNot

output

A copy pair cannot be

suspended because the specified

C195

copy pair is already in the

suspend status.

Not outputOutputNot

output

The command cannot be

executed because there is no

C198

copy pair that can be suspended

in the group.

Not outputOutputNot

output

The copy pair cannot be

suspended. The reason might be

one of the following:

C199

• The status of the bootup

volume is being changed.

• There is a copy pair in the

group that has a status that

is being changed.

Not outputOutputNot

output

A CA or CAA copy pair status

cannot be changed because the

C1BE

storage system is being turned

on.

Not outputOutputNot

output

The specified copy pair cannot

be suspended, resynchronized,

C1D1

or deleted because a path is not

set up between CUs (SSIDs) in

the copy pair, or the path is in

an error status.

Table 61 Details of error codes C2xx

Type of errorError detailsError

code

OthersTHPzPATHCMDCAJCAACABC

Not outputOutputNot

output

A copy pair cannot be made

because the specified copy

C211

pair is already in the DUPLEX

status.

Not outputOutputNot

output

The command cannot be

executed because the serial

C213

number or SSID of the primary

storage system in the

parameter does not match the

actual serial number or SSID of

the primary storage system.

Not outputOutputNot

output

The command cannot be

executed because the serial

C214

number or SSID of the

secondary storage system in

the parameter is different from

the one already registered with

the path (including ones

without a path).

226 Storage system sense byte information