HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 62 Details of error codes C3xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot
output
The P-VOL is not in the SIMPLEX
status.
C314
Not outputOutputNot
output
The P-VOL has PIN data.C315
Not outputOutputNot
output
The drive copy is being
performed on the P-VOL
(troubleshooting).
C316
Not outputOutputNot
output
The drive copy is being
performed on the P-VOL (SVP
request).
C317
Not outputOutputNot
output
The copy task ending process is
being performed on the P-VOL.
C318
Not outputOutputNot
output
The collection copy is being
performed on the P-VOL.
C319
Not outputOutputNot
output
The P-VOL is in a collection
access status.
C31A
Not outputOutputNot
output
The logical volume of the P-VOL
is blocked (PDEV blocking
factor).
C31B
Not outputOutputNot
output
The P-VOL cannot be accessed
(because the LDEV is blocked or
in the NOT READY status).
C31C
Not outputOutputNot
output
Formatting of the logical volume
is being performed on the
P-VOL.
C31D
Not outputOutputNot
output
The P-VOL is in the READ ONLY
status.
C31E
Not outputOutputNot
output
The logical path between the
MCU and the RCU is not set
(number of path = 0).
C320
Not outputOutputNot
output
The condition setting for the
number of the Minimum Path
C321
between the MCU and the RCU
is invalid.
Not outputOutputNot
output
The MCU is a storage system
type that is not supported by CA
or CAA.
C322
Not outputOutputNot
output
The RCU sequence (number,
SSID or CU) is incorrect.
C324
Not outputOutputNot
output
The RCU is not NVS ON.C325
Not outputOutputNot
output
The subsystem level cache of the
RCU is not valid.
C326
Not outputOutputNot
output
A copy pair cannot be made
because the status of the P-VOL
does not permit remote copy.
C327
Not outputOutputNot
output
The track format of the P-VOL
and S-VOL do not match.
C328
Details of error codes 229