HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 66 Details of error codes EBxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputA CAJ copy pair could not be
made because of one the
following reasons:
EB88
• The specified S-VOL is
already being used as the
S-VOL of a BC copy pair.
• The specified volume is in
Not Ready status.
• The LDEV guard
(PROTECT) is set for the
S-VOL.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the emulation
EB89
types of the specified P-VOL
and S-VOL do not match.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the emulation
EB8A
types of the specified M-JNL
group and R-JNL group do not
match.
Not outputOutputNot outputA CAJ copy pair status cannot
be changed because the
EB94
status of the specified copy
pair does not allow the status
transition.
Not outputOutputNot outputA CAJ copy pair status cannot
be changed because the
EBA0
specified S-VOL is not
installed.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the THPz
EBA7
volume specified for the
S-VOL satisfies one of
thefollowing conditions:
• The capacity is being
expanded.
• The pages are being
released.
• The pool of the
corresponding THPz is
being initialized.
Not outputOutputNot outputThe command could not be
executed because the remote
EBA8
command has been issued to
a volume that is not installed.
Not outputOutputNot outputThe remote command cannot
be executed because the
EBB3
command device has not
been defined.
Not outputOutputNot outputThe command could not be
executed because the
EBBD
command device is under
LDEV guard.
254 Storage system sense byte information