HP XP7 Business Continuity Manager Reference Guide (TK954-96004)

4
The timing for when the defined values are reflected is as shown in “Contents of the Copy Group Attributes Panel”
(page 74), in the table item of When effective.
5
It is displayed if P-VOL or S-VOL is shared with other copy pairs in the definition (for example, in a 1:n BC copy pair
configuration or when S-VOL for CAA is used as P-VOL for BC).
6
MISMATCH might be displayed. This happens when the device information during definition, as indicated by Primary
Volume and Secondary Volume, differs from the device information reported by the storage system. In this case, the
device information reported by the storage system is displayed in the Pair Volume column. If MISMATCH is displayed,
check the configuration file used, as well as the actual storage system configuration information and settings.
NOTE: In the following cases, N/A is displayed for the device information.
• When the YKQRYDEV command returns an error
• When displaying information about a device of a remote storage system if the route list has
not been loaded or the target storage system is not included in the route list
Volume Query Information (CAA) panel
If you specify q in AC on the Copy Group Pair Status panel, the YKQRYDEV command is executed
on the P-VOL and S-VOL, and the Volume Query Information (CAA) panel is displayed for a
TrueCopy Asynchronous for Mainframe copy pair.
Figure 69 (page 137) and the figure following Figure 69 (page 137) show a configuration example
and the Volume Query Information (CAA) panel displayed in this configuration.
Figure 69 Volume query configuration example (CAA)
Volume Query Information (CAA) Row 1 to 1 of 1
Command ===> Scroll ===> PAGE
2012/03/28 14:40:04
Copy Group ID . . . . . . . . . : TCA
Copy Type(in Configuration): CAA Copy Type(from Storage System) : CAA
---------- Primary Volume ---------- --------- Secondary Volume ---------
SN SSID CU CCA DEVN Status Dir SN SSID CU CCA DEVN Status
10037 000A 07 0F 140F- DUPLEX (02) > 10007 000C 07 02 0002- DUPLEX (02)
Suspend ATTIME (GMT) : 20120328 05:48:12.000000 -WAITING
(LOCAL) : 20120328 14:48:12.000000
Consistency Time (GMT) : 20120328 05:40:03.190322
(LOCAL) : 20120328 14:40:03.190322
C/T ID ERROR LVL TIMER TYPE PROT MODE COPY MODE FLOW CTL DIF UNIT GENID
0F GROUP SYSTEM PROTECT NORMAL Y CYL 00
Other CopyPair Information
----- Primary/Secondary ----- ---- Pair Volume ----
Type C/T ID SN DEVN Status Dir SN SSID CU CCA DEVN
BC Pri 10037 140F- SUSPOP (04) > 10037 000A 07 10 1410
******************************* Bottom of data ********************************
Manage Copy Groups Panel (Copy Group Operation) 137