HP XP7 Business Continuity Manager Reference Guide (TK954-96004)

Table 150 Device Information Structure (continued)
DescriptionREXX variables
• VSP (XP P9500)
• VSPG1000 (XP7)
Serial number of secondary storage systemSerialnum
Number of path group IDs established from the
storage system to which this device belongs to
the storage system of Sec.SerialNum (0 to 64)
0
Path group IDPATHIDn
Number of physical paths (0–8) in the inter-disk
controller logical path with the corresponding
path group ID
0
Status of physical pathStatusn
• NO PATH
• ESTABLISHED
• INIT FAILED
• TIME OUT
• NO RESOURCES AT PRI
• NO RESOURCES AT SEC
• SERIAL# MISMATCH
• CONFIG ERROR
Initiator port numberPri.Port
Target port numberSec.Port
Existence of PSN information (Valid)Info
1
PSN
Physical DKC serial numberPhysicalSerialNum
13
Logical DKC numberLDKCNum
13
1
When the information is acquired, Valid is stored.
2
For Non Gen'ed volumes or remote storage system volumes, information cannot be obtained for
the following storage system models:
• XP12000/XP10000 Disk Array
• XP24000/XP20000 Disk Array
• XP P9500 Disk Array
3
Information can be acquired for the following models:
• HP XP12000/XP10000 Disk Array
• HP XP24000/XP20000 Disk Array
• HP XP P9500 Disk Array
• HP XP7 Storage
4
When the emulation type of the journal volume is OPEN-V, NORMAL is displayed.
5
Information can be acquired for CA.
6
Information can be acquired for TCA.
7
This value is invalid for a PPRC copy pair.
346 Data Objects