HP XP7 Business Continuity Manager Reference Guide (TK954-96004)

Figure 43 Setting C/T ID Attributes Panel
“Contents of the Setting C/T ID Attributes Panel” (page 82) describes the items in the Setting C/T
ID Attributes panel:
Table 51 Contents of the Setting C/T ID Attributes Panel
Specifiable copy typesDescriptionItem
If the copy type is BC, CA, or CAA,
specify the C/T group ID (required for
CAA).
C/T ID (JNLG)
• BC
• CA
• CAA
Specify a value between 00 and 7F
(depending on the storage system
type).
• CAJ
If the copy type is CAJ, specify the
journal group number of the primary
site as the C/T group ID (required for
CAJ).
Specify a value between 00 and FF.
CAJSpecify the journal group number of
the secondary site as the sub C/T
group ID (required for CAJ).
sub C/T ID (JNLG).
Specify a value between 00 and FF.
NOTE: For configurations that use
delta resync, specify the same value
for both the CAJ copy pair and the
CAJ copy pair for delta resync.
CAJSpecify the path group ID.Path ID
Specify a value between 00 and FF.
If the copy type is BC, CA, or CAA, specifying a value in C/T ID (JNLG) and then pressing Enter
displays the Copy Group Pair Detail panel. If the copy type is CAJ, specifying a value in C/T ID
(JNLG) and sub C/T ID (JNLG) and then pressing Enter displays the Copy Group Pair Detail panel.
Copy Group Pair Detail Panel
The Copy Group Pair Detail panel, which displays details about the copy pairs in a copy group,
is displayed in these cases:
• If Use Container in the Add Copy Group panel is cleared, and the Enter key is pressed
• If the copy group for which e is specified for AC in the Copy Group Selection List panel is not
a CG container
• If e is specified for AC in the Copy Group Detail Definition panel
• If the F5=Add key is pressed in the Copy Group Detail Definition panel
If you press the F5=Add key in the Copy Group Pair Detail panel, the Pair Selection List (Primary)
panel is displayed. If you press the F5=Second key in the Pair Selection List (Primary) panel, the
Pair Selection List (Secondary) panel is displayed. From these panels, you can select the devices
to pair in order to define a copy pair.
82 ISPF panels