HP XP7 Business Continuity Manager Release Notes (TK954-96001)

• BCM does not support a recovery procedure from failure in 4x4x4 Multi-Target configuration with
Delta Resync by misoperation. In this case, use the following assistance:
If you need to call technical support, make sure to provide as much information about the problem
as possible, including:
◦ The circumstances surrounding the error or failure.
◦ The content of any error messages displayed on the host systems.
◦ The content of any error messages displayed on Remote Web Console.
◦ The Remote Web Console configuration information (use the FD Dump Tool).
◦ The service information messages (SIMs), including reference codes and severity levels,
displayed by Remote Web Console.
• Do not specify the following values to the DADID of a Disk Configuration Definition, a copy group,
or a route list. Specifying those values may cause the information displayed in the Discover HP
Storage Arrays panel to become incorrect.
◦ "R"
◦ "CMD"
◦ "I"
◦ "K"
◦ "RC"
Examples that cannot be specified:
◦ "R"
◦ "xx.R"
◦ "R.xx"
◦ "xx.R.xx"
where xx is an arbitrary string of one or more characters.
• The YKWATCH command is not available for monitoring a copy pair status transition if the PPRCSUM
feature in DEVSUPxx is enabled in z/OS V1R13 or later. Use the YKEWAIT command to monitor
instead.
• TLS 1.2 is not possible when HTTPS communicates with Replication Manager
Specification differences from previous versions
This section describes the specification differences between BCM version 7.6.0-00 and version 8.0.0-00.
• In configuration files and in REXX variable structures, "XP7" is displayed as "VSPG1000".
Commands
New specification in version 8.0.0-00Specification in version 7.6.0-00Command
SMODEL({USP|USPV|VSP|VSPG1000})SMODEL({USP|USPV|VSP})YKQRYDEV
Specification differences from previous versions 11