HP XP7 External Storage for Open and Mainframe Systems User Guide (TK914-96001)

IBM DS3000/DS4000/DS5000 series
The port must be configured as a target attached to a Windows host.
Set system parameters according to the following table. For connection parameters not shown,
refer to IBM DS3000/DS4000/DS5000 series documentation.
Parameter SettingParameter
When alternate paths are connected to different clusters on the
DS3000/DS4000/DS5000 series side: Linux
host type
IBM V7000 series
Set system parameters according to the following table. For connection parameters not shown,
refer to the IBM V7000 series documentation.
Table 2 System parameters for connecting IBM V7000 series
Parameter settingParameter
Generichost type
The model name of the IBM V7000 series is displayed as "SVC" on the Remote Web Console
window.
IBM SVC series
The port must be configured as a target attached to a Windows host.
Set system parameters according to the following table. For connection parameters not shown,
refer to IBM SVC series documentation.
Parameter SettingParameter
Generichost type
IBM XIV series
The port must be configured as a target attached to a Windows host.
Device serial number differs between IBM XIV series and HP XP7 Storage, as shown in the following
table.
Display in IBM XIVDisplay in HP XP7 Storage
TypeItemTypeItem
Decimal valueFirst 2 digits of (System) Serial
number
Decimal valueFirst 2 digits of Serial Number
Decimal valueLast 5 digits of (System) Serial
number
Hexadecimal valueLast 5 digits of Serial Number
Decimal valueDevice serial numberHexadecimal valueCharacteristic 1
Fujitsu FibreCAT CX series
The port must be configured as a target attached to a Windows host.
90 Supported external storage systems