HP XP7 RAID Manager Installation and Configuration User Guide (T1610-96065)
Table Of Contents
- XP7 RAID Manager Installation and Configuration User Guide
- Contents
- 1 Installation requirements
- System requirements
- Supported environments
- Supported Business Copy environments
- Supported Continuous Access Synchronous environments
- Supported Continuous Access Asynchronous environments
- Supported Continuous Access Journal environments
- Supported Snapshot environments
- Supported Data Retention environments
- Supported Database Validator environments
- Supported guest OS for VM
- Supported IPv4, IPv6 platforms
- Requirements and restrictions for z/Linux
- Requirements and restrictions for VM
- Porting notice for OpenVMS
- Using RAID Manager with Hitachi and other storage systems
- 2 Installing and configuring RAID Manager
- 3 Upgrading RAID Manager
- 4 Removing RAID Manager
- 5 Troubleshooting
- 6 Support and other resources
- A Fibre-to-SCSI address conversion
- B Sample configuration definition files
- Glossary
- Index
screen to complete the installation. The install directory is HORCM (fixed value) directly under
the drive.
7. An InstallShield opens. Follow the instructions on the screen to install the RAID Manager
software.
8. Reboot the Windows server, and verify that the correct version of the RAID Manager software
is running on your system by executing the raidqry -h command. Example:
C:\HORCM\etc>raidqry -h
Model : P9000 Raid-Manager-XP/WindowsNT
Ver&Rev: 01.30.xx
Usage : raidqry [options] for HORC
9. Changing the RAID Manager user: see “Changing the RAID Manager user (Windows systems)”
(page 36) to ensure that the RAID Manager user is appropriately set for the upgraded/installed
files.
When you upgrade the RAID Manager software, the sample script file is overwritten. Therefore,
if you edit the sample script file directly, back up the sample script file, and then upgrade the RAID
Manager software. After that, restore the data of the sample script file by using the backup file.
For details about the sample script file, see XP7 RAID Manager User Guide.
Upgrading RAID Manager in an OpenVMS environment
To update the RAID Manager software version on an OpenVMS system:
1. You can upgrade the RAID Manager software only when RAID Manager is not running. If
RAID Manager is running, shut down RAID Manager using the horcmshutdown command to
ensure a normal end to all functions:
$horcmshutdown for one HORCM instance $horcmshutdown 0 1 for two HORCM instances
When a command is being used in interactive mode, terminate it using the "-q" option.
2. Insert and mount the provided installation medium.
3. Execute the following command:
$ PRODUCT INSTALL RM /source=Device:[PROGRAM.RM.OVMS]/LOG
Device:[PROGRAM.RM.OVMS] where HITACH-ARMVMS-RM-V0122-2-1.PCSI exists
4. Verify installation of the proper version using the raidqry command:
$ raidqry -h
Model: RAID-Manager/OpenVMS
Ver&Rev: 01-22-03/06
Usage: raidqry [options]
5. Follow the requirements and restrictions in “Porting notice for OpenVMS” (page 19).
Upgrading RAID Manager in an OpenVMS environment 45