HP XP7 RAID Manager Installation and Configuration User Guide (T1610-96065)
Table Of Contents
- XP7 RAID Manager Installation and Configuration User Guide
- Contents
- 1 Installation requirements
- System requirements
- Supported environments
- Supported Business Copy environments
- Supported Continuous Access Synchronous environments
- Supported Continuous Access Asynchronous environments
- Supported Continuous Access Journal environments
- Supported Snapshot environments
- Supported Data Retention environments
- Supported Database Validator environments
- Supported guest OS for VM
- Supported IPv4, IPv6 platforms
- Requirements and restrictions for z/Linux
- Requirements and restrictions for VM
- Porting notice for OpenVMS
- Using RAID Manager with Hitachi and other storage systems
- 2 Installing and configuring RAID Manager
- 3 Upgrading RAID Manager
- 4 Removing RAID Manager
- 5 Troubleshooting
- 6 Support and other resources
- A Fibre-to-SCSI address conversion
- B Sample configuration definition files
- Glossary
- Index
Figure 14 Configuration for Multiple Networks
For example:
# horcctl -ND -g IP46G
Current network address = 158.214.135.106,services = 50060# horcctl -NC -g IP46G
Changed network address(158.214.135.106,50060 -> fe80::39e7:7667:9897:2142,50060)
For IPv6 only, the configuration must be defined as HORCM/IPv6.
Figure 15 Network Configuration for IPv6
It is possible to communicate between HORCM/IPv4 and HORCM/IPv6 using IPv4 mapped to
IPv6.
64 Sample configuration definition files