HP XP7 RAID Manager Installation and Configuration User Guide (T1610-96065)

Windows: set HORCC_MRCF=1
• Designate a group name (Oradb) and a local host P-VOL a case.
# paircreate -g Oradb -vl
This command creates pairs for all LUs assigned to group Oradb in the configuration definition
file (two pairs for the configuration in above figure).
• Designate a volume name (oradev1) and a local host P-VOL a case.
# paircreate -g Oradb -d oradev1 -vl
This command creates pairs for all LUs designated as oradev1 in the configuration definition file
(CL1-A,T1,L1 and CL1-D,T2,L1 for the configuration in the above figure).
• Designate a group name and display pair status.
# pairdisplay -g Oradb
Group PairVol(L/R) (Port#,TID,LU-M), Seq#, LDEV#..P/S, Status, Seq#, P-LDEV# M
oradb oradev1(L) (CL1-A, 1,1 - 0) 30053 18..P-VOL COPY 30053 20 -
oradb oradev1(R) (CL2-B, 2,1 - 0) 30053 20..S-VOL COPY ----- 18 -
oradb oradev2(L) (CL1-A, 1,2 - 0) 30053 19..P-VOL COPY 30053 21 -
oradb oradev2(R) (CL2-B, 2,2 - 0) 30053 21..S-VOL COPY ----- 19 -
Example of RAID Manager commands with HOSTB (group Oradb):
• When the command execution environment is not set, set HORCC_MRCF to the environment
variable.
For C shell: # setenv HORCC_MRCF 1
Windows: set HORCC_MRCF=1
• Designate a group name and a remote host P-VOL a case.
# paircreate -g Oradb -vr
This command creates pairs for all LUs assigned to group Oradb in the configuration definition
file (two pairs for the configuration in the above figure).
• Designate a volume name (oradev1) and a remote host P-VOL a case.
# paircreate -g Oradb -d oradev1 -vr
This command creates pairs for all LUs designated as oradev1 in the configuration definition file
(CL1-A,T1,L1 and CL1-D,T2,L1 for the configuration in the above figure).
• Designate a group name and display pair status.
# pairdisplay -g Oradb
Group PairVol(L/R) (Port#,TID,LU-M), Seq#, LDEV#..P/S, Status, Seq#, P-LDEV# M
oradb oradev1(L) (CL2-B, 2,1 - 0) 30053 20..S-VOL COPY ----- 18 -
oradb oradev1(R) (CL1-A, 1,1 - 0) 30053 18..P-VOL COPY 30053 20 -
oradb oradev2(L) (CL2-B, 2,2 - 0) 30053 21..S-VOL COPY ----- 19 -
oradb oradev2(R) (CL1-A, 1,2 - 0) 30053 19..P-VOL COPY 30053 21 -
Example of RAID Manager commands with HOSTA (group Oradb1):
• When the command execution environment is not set, set HORCC_MRCF to the environment
variable.
For C shell: # setenv HORCC_MRCF 1
Examples of RAID Manager configurations 79