HP XP7 RAID Manager Reference Guide (T1610-96064)

4 Command tools
This chapter provides the specifications for the RAID Manager command tools.
inqraid
The inqraid command is a RAID Manager command tool used to confirm the drive connection
between the storage system and host system. The inqraid command displays the relation between
special file(s) on the host system and actual physical drive of the RAID storage system.
Syntax
/HORCM/usr/bin/inqraid [-h | quit | -inqdump
| -fx[p][l][g][c][h][n] | -find[c] | <special file>
| -CLI[W][P][N][B] | -sort [-CM ] | -pin | -export]
/HORCM/etc/inqraid [-h | quit | -inqdump | -fx[p][l][g][c][h][n]
| -find[c] | <special file> |-CLI[W][P][N][B] | -sort [-CM ]
| -gvinf | -svinf | -gplba | -fv| -pin| -export]
Options and parameters
DescriptionOption
Displays Help/Usage.-h
Terminates from waiting STDIN and exits this command.quit
Displays information for standard inquiry with Dump Image of hexadecimal.-inqdump
Displays the LDEV number (hexadecimal).-fx
Finds the appropriate group within the configuration file using a special file provided by STDIN.-find[c]
-find: Searches a group on the configuration definition file (local instance) from <special file>
of STDIN by using pairdisplay command, and uses the following options of the pairdisplay
command to display its state. This option must be specified HORCMINST as command execution
environment.
For Business Copy/Business Copy/Snapshot:
pairdisplay -d <Seq#> <LDEV#> 0 1 2 -l [-fx] [-CLI] 2>/dev/null
For Continuous Access Synchronous/Continuous Access Journal:
pairdisplay -d <Seq#> <LDEV#> -l [-fx] [-CLI] 2>/dev/null
Note: <Seq#> and <LDEV#> are included using SCSI Inquiry command. And for XP7, specify
the number of which 300,000 is added to the serial number for <Seq#>.
<special file>: This option is used to specify the special file name as argument of command.
If no argument, this command makes mode that waits for STDIN. The input from the special
file has to be waited.
-findc: Uses the following options of the pairdisplay command, and displays with CLI format
by editing an output of pairdisplay command. This option must be specified HORCMINST as
command execution environment.
For Business Copy/Business Copy/Snapshot:
pairdisplay -d <Seq#> <LDEV#> <MU#> -fd -CLI 2>/dev/null
For Continuous Access Synchronous/Continuous Access Journal:
pairdisplay -d <Seq#> <LDEV#> -fd -CLI 2>/dev/null
Note: <Seq#> and <LDEV#> are included using SCSI Inquiry command. And for XP7, specify
the number of which 300,000 is added to the serial number for <Seq#>.
<special file>: Specifies a special file name as the argument of a command. If no argument,
this command makes mode that waits for STDIN. The input from the special file has to be
waited.
116 Command tools