HP XP7 RAID Manager Reference Guide (T1610-96064)

Syntax
When changing the data overflow watching time of journal data area, path blocked watch or the
timer type, specify more than one option.
# raidcom modify journal -journal_id <journal ID#>
{[-data_overflow_watch <time>][-cache_mode (y | n}]
[-timer_type <timer type>][-copy_size <size>]}
When changing the path blocked watch.
# raidcom modify journal -journal_id <journal ID#>
-path_blocked_watch <time> [-mirror_id <mu#>]
When changing the MP blade ID.
# raidcom modify journal -journal_id <journal ID#>
-mp_blade_id <mp#>
Options and parameters
DescriptionOption
Specifies the journal number (0-255).-journal_id <journal ID#>
The data overflow watch timer (0-600) (second).-data_overflow_watch <time(sec)>
Specifies the watch time for the journal data area being full.
If 0 is specified, the setting of the data overflow watch timer is changed and
the inflow control for journals is set to disabled.
The watch for the path blockage (1-60) (minute).-path_blocked_watch <time(min)>
Use Remote Web Console to set the value with more than 60 minutes.
If 0 is specified, the time of the watch for the path blockage does not change,
and the watch for the path blockage is invalid.
Specifies whether to use the cache mode.-cache_mode (y | n}
• y: Cache mode enabled (E)
• n: Cache mode disabled (D)
Specifies the timer type: system, local, or None. For example:[-timer_type <timer type>]
• -timer_type system
• -timer_type local
For details, see the Continuous Access Journal manual for the storage system.
Specifies the MP blade ID (0-7).-mp_blade_id <mp#>
Changing MP blade ID should be executed during off-peak hours of I/O
loading. Do not change the MP blade ID during initial copying of Continuous
Access Journal (on-peak hours of I/O loading).
To change the MP blade ID again for the same journal, wait for more than
30 minutes after changing the MP blade ID. For example:
• -mp_blade_id 2
Specifies the Mirror ID.[-mirror_id <mu#>]
If the setting is omitted, "0" is used.
Specify the <size> in range of 1 to 15 as follows.[-copy_size <size>]
• 1 or 2: low-speed
• 3: medium-speed
• More than 4: high-speed
raidcom modify journal 159