HP XP7 RAID Manager Reference Guide (T1610-96064)

Options and parameters
DescriptionOption
Specifies the LDEV number (0-65279). For example:
• -ldev_id 200
-ldev_id <ldev#>
(0-65279)
Specifies the device information extracted from the LDEV belonging to the device
group.Specify "ldev" (fixed). The information of LDEV belonging to the device group is
used.
-grp_opt <group option>
Specifies the name of device group (maximum 32 characters) to be operated.-device_grp_name <device
group name> [<device
name>]
To operate an LDEV in the device group, specify the device name of LDEV (maximum 32
characters) within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are operated.
Examples
Deleting an LDEV: 200.
raidcom delete ldev -ldev_id 200
Deleting an LDEV belonging to the device group: grp1.
raidcom delete ldev -grp_opt ldev -device_grp_name grp1
raidcom extend ldev
Extends the capacity of V-VOL for Thin Provisioning, Thin Provisioning Z, or Smart Tiers, or Smart
Tiers Z volume.
If the specified LDEV is not a V-VOL of Thin Provisioning, Thin Provisioning Z, or Smart Tiers, or
Smart Tiers Z, the command is rejected with EX_ENOOBJ.
A device group can also be specified instead of an LDEV.
Syntax
raidcom extend ldev {-ldev_id <ldev#> | -grp_opt <group option>
-device_grp_name <device group name> [<device name>]}
-capacity <size> | -offset_capacity <size> | -cylinder <size>
Options and parameters
DescriptionOption
Specifies the LDEV number (0-65279). Specify LDEVs for Thin Provisioning/Thin Provisioning
Z/Smart Tiers/Smart Tiers Z. For example:
• -ldev_id 200
-ldev_id <ldev#>
(0-65279)
Specifies the device information extracted from the LDEV belonging to the device
group.Specify "ldev" (fixed). The information of LDEV belonging to the device group is
used.
-grp_opt <group option>
Specifies the name of device group (maximum 32 characters) to be operated.-device_grp_name <device
group name> [<device
name>]
To operate an LDEV in the device group, specify the device name of LDEV (maximum 32
characters) within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are operated.
Specifies the capacity to be extended. The unit is g/G, m/M, or k/K. If this option is
omitted, block (512k) is used.
-capacity <size>
Example of specification:
1GB (gigabyte) is:
raidcom extend ldev 163