HP XP7 RAID Manager Reference Guide (T1610-96064)

1 1-1 NML E D 2 CL2-A 50060e8005fa0f38 2 3 NML 60010 VSP N
PHG GROUP STS CM IF MP# PORT WWN PR LUN PHS Serial# PRODUCT_ID LB PM
5 1-1 NML E D 0 CL3-B 50060e8006fc3222 1 0 NML 64562 VSP N M
5 1-1 NML E D 0 CL5-A 50060e8006fc4150 - - UNK 64562 VSP N M
5 1-2 NML E D 2 CL3-B 50060e8006fc3222 - - UNK 64562 VSP N A
5 1-2 NML E D 2 CL5-A 50060e8006fc4150 1 0 NML 64562 VSP N A
Description of each column in output example:
PHG: Displays the path group number for the external volume.
GROUP: Displays the external volume group number.
- STS: Displays the following status of the external volume.
- NML: "Normal"
- CHK: "Checking"
- SYN: "Cache Destage"
- DSC: "Disconnect" in the external path for the external volume.
- BLK: "Blockading" in the external path for the external volume.
- UNK: "Unknown"
- WAR: "Warning"
CM: Displays the cache mode for external volume.
E: Enable, D: Disable
IF: Displays the cache inflow control for external volume.
E: Enable, D: Disable
MP#: Displays the MP blade ID for the external volume owner.
PORT: Displays the port number.
WWN: Displays the target wwn on the external storage system.
PR: Displays the priority number in the external volume path group.
LUN: Displays the LUN in the port on the external storage system side.
PHS: Displays the following status of the external path.
- NML: "Normal" status in external path.
- CHK: "temporary blockading " status in external path.
- BLK: "blockading" status in external path.
- DSC: "disconnected" status in external path.
- UNK: "Unknown" status in external path.
Serial#: Displays the serial number of external storage system.
For XP7 Storage, the number of which 300,000 is added to the serial number is displayed.
PRODUCT_ID: Displays the PRODUCT_ID of the external storage system.
LB: Displays the following I/O load balance mode for the external storage system.
- N: "normal round robin" mode.
- E: "extended round robin" mode.
- D: Executes with one path without load balance mode.
If Single is used for the path mode or the load balance mode is not supported, a hyphen (-) is
displayed.
PM: Displays the path mode for the external storage system.
- M: Multiple path mode
raidcom get path 185