HP XP7 RAID Manager Reference Guide (T1610-96064)

Displays the settings of the priority.
• Y: Preferred
• N: Non-preferred
IOps
If the PRI setting is Y, displays the threshold. If the PRI setting is N, displays the maximum value. If
the value is set by the transferred rate (KBps), displays a hyphen (-).
KBps
If the PRI setting is Y, displays the threshold. If the PRI setting is N, displays the maximum value. If
the value is set by the IO rate (IOps), displays a hyphen (-). If the value is set by MB, 1 MB is
calculated as 1024 KB, and displays the value by KB.
Serial#
Displays the Seq#.
For XP7 Storage, the number of which 300,000 is added to the serial number is displayed.
raidcom monitor pfc_wwn
Gets the monitoring information of Performance Control target WWN.
Syntax
raidcom monitor pfc_wwn {-hba_wwn <wwn_strings> | -pfc_name <nick_name>}
Options and parameters
DescriptionOption
Specifies WWN that you get the monitoring information.-hba_wwn
<wwn_strings>
WWN is specified in hexadecimal of 16 digits. The 17th digit is ignored.
Specifies the PFC name that you get the monitoring information.-pfc_name
<nick_name>
Up to 64 characters can be specified by CLI.
Examples
Specifies WWN (50060e8005fa0f36) to get the monitoring information.
# raidcom monitor pfc_wwn -hba_wwn 50060e80,05fa0f36
PORT PFC_MD IOps KBps Serial#
CL4-E PORT 5000 5000000 63528
Specifies the PFC name (WWN_NICK_LINUX) to get the monitoring information.
# raidcom monitor pfc_wwn -pfc_name WWN_NICK_LINUX
PORT PFC_MD IOps KBps Serial#
CL4-E PORT 5000 5000000 63528
Description on each column in output example
PORT
Displays the port to which the WWN is set.
PFC_MD
Displays the Control mode of the PFC.
• WWN: WWN control
• PORT: Port control
IOps
Displays the current IO rate (IOps) of the specified WWN of or the specified PFC name.
228 Configuration setting commands