HP XP7 RAID Manager Reference Guide (T1610-96064)

DescriptionOption
Allows designation of an LDEV by raw device file name. The -pdg option is used to show a LUN
on the host view by finding a host group (XP1024/XP128 Disk Array and later).
-pd[g]
<raw_device>
Designates the time interval in seconds.-s [interval] or -sm
[interval]
• -s: Interprets the time interval as seconds.
• -sm: Interprets the time interval as minutes.
• [interval]: Designates the time interval value (1 to 60). If not specified, the default interval (3)
is used.
• [count]: Designates the number of repeats. When omitted, this command repeats until CNTL-C.
Returned values
--
Error codes
--
Examples
The following shows an example of the raidar command and its output.
# raidar -p cl1-a 15 6 -p cl1-b 14 5 -p cl1-a 12 3 -s 3
TIME[03] PORT T L VOL STATUS IOPS HIT(%)W(%)IOCNT
13:45:25 - - - - - - - - -
13:45:28 CL1-A 15 6 SMPL - 200.0 80.0 40.0 600
CL1-B 14 5 P-VOL PAIR 133.3 35.0 13.4 400
CL1-A 12 3 P-VOL PSUS 200.0 35.0 40.6 600
Output of the raidar command:
IOPS: # of I/Os (read/write) per second (total I/O rate).
HIT(%): Hit rate for read I/Os (read hit rate).
W(%): Ratio of write I/Os to total I/Os (percent writes).
IOCNT: number of write and read I/Os.
raidqry
The raidqry command (RAID query) displays the configuration of the connected host and RAID
storage system.
Syntax
raidqry { -h | -q | -z | -I[H][M][instance#] or
I[TC][SI][instance#] | -l | -r <group> | [ -f ] | -g}
Options and parameters
DescriptionOption
Displays Help/Usage and version information.-h
Terminates the interactive mode and exits the command.-q
Makes the raidqry command enter the interactive mode. The -zx option guards performing of the
HORCM in the interactive mode. When this option detects a HORCM shut down, interactive mode
terminates.
-z or -zx
OpenVMS cannot use the -zx option.
raidqry 75