HP XP7 RAID Manager Reference Guide (T1610-96064)

• BH = Mapped E-lun as hidden from the host, but LDEV blockading.
• BV = Mapped E-lun as visible to the host, but LDEV blockading.
• B = Unmapped to the E-lun, but LDEV blockading.
E-Seq#: production (serial) number of the external LUN ('Unknown' shown as '-').
For XP7, the number of which 300,000 is added to the serial number is displayed.
E-LDEV#: LDEV# of the external LUN ('Unknown' shown as '-').
Example 3
Example of raidvchkdsp command with -v cflag option and its output:
raidvchkdsp -g vg01 -fd -v cflag
Group PairVol Device_File Seq# LDEV# BR-W-E-E MR-W-B
BR-W-B-Z SR-W-B-S
vg01 oradb1 c4t0d2 2332 2 D E B R D D D
D E E E D E D D
vg01 oradb2 c4t0d3 2332 3 D E B R D D D
D E E E D E D D
Output of the raidvchkdsp command with -v cflag option:
BR-W-E-E: Displays the flags for checking data block size.
R=E: Checking for data block size on Read is enabled.
R=D: Checking for data block size on Read is disabled.
W=E: Checking for data block size on Write is enabled.
W=D: Checking for data block size on Write is disabled.
E=L: Data block on Read/Write is interpreted as little endian format.
E=B: Data block on Read/Write is interpreted as big endian format.
E=W: This shows the Warning that Read/Write is not rejected when validation error is detected.
E=R: This shows the Reject that Read/Write is rejected when validation error is detected.
MR-W-B: Displays the flags for checking CHK-F3 in the data block.
R=E: Checking for CHK-F3 on Read is enabled.
R=D: Checking for CHK-F3 on Read is disabled.
W=E: Checking for CHK-F3 on Write is enabled.
W=D: Checking for CHK-F3 on Write is disabled.
B=E: Checking for CHK-F3 in the data block #0 is enabled.
B=D: Checking for CHK-F3 in the data block #0 is disabled.
BR-W-B-Z: Displays the flags for checking regarding CHK-F2 in the data block.
R=E: Checking for CHK-F2 on Read is enabled.
R=D: Checking for CHK-F2 on Read is disabled.
W=E: Checking for CHK-F2 on Write is enabled.
W=D: Checking for CHK-F2 on Write is disabled.
B=E: Comparing for CHK-F2 in the data block is enabled.
B=D: Comparing for CHK-F2 in the data block is disabled.
Z=E: The NON zero checking for CHK-F2 in the data block shows to being enabled.
Z=D: The NON zero checking for CHK-F2 in the data block shows to being disabled.
SR-W-B-S: Displays the flags for checking regarding CHK-F1 in the data block.
R=E: Checking for CHK-F1 on Read is enabled.
raidvchkdsp 83