HP XP7 RAID Manager Reference Guide (T1610-96064)

U(%): Displays the usage rate of the Fast Snap/Snapshot/Thin Provisioning pool.
SSCNT: Displays the number of Fast Snaps/Snapshot volume in Fast Snap/Snapshot pool or the
total number of Thin Provisioning volumes mapped in this Thin Provisioning pool.
Available(MB): Displays the available capacity for the volume data on the Fast Snap/Snapshot/Thin
Provisioning pool.
Capacity(MB): Displays the total capacity in the Fast Snap/Snapshot/Thin Provisioning pool.
Seq#: Displays the serial number of the RAID storage system.
For XP7, the number of which 300,000 is added to the serial number is displayed.
Num: Displays the number of LDEVs configured the Fast Snap/Snapshot/Thin Provisioning pool.
LDEV#: Displays the first number of LDEV configured the Fast Snap/Snapshot/Thin Provisioning
pool.
H(%): Displays the threshold rate being set to the Fast Snap/Snapshot/Thin Provisioning pool as
High water mark. 'Unknown' is shown as '-'.
Example of raidvchkscan command example with -v pida option
# raidvchkscan -v pida 0
PID POLS U(%) AV_CAP(MB) TP_CAP(MB) W(%) H(%) Num LDEV# LCNT TL_CAP(MB)
001 POLN 10 45000000 50000000 50 80 2 265 33 65000000
002 POLF 95 10000 100000000 50 80 3 270 900 100000000
004 POLN 0 10000000 100000000 80 90 2 280 0 0
Output of the raidvchkscan command with -v pida option:
PID: Displays the Thin Provisioning pool ID.
POLS: Displays the following status of the Thin Provisioning pool:
• POLN = 'Pool Normal'
• POLF = 'Pool Full'
• POLS = 'Pool Suspend'
• POLE = 'Pool failure'. In this state, information for the pool has no meaning and is displayed
as '0'.
U(%): Displays the usage rate of the Thin Provisioning pool.
AV_CAP(MB): Displays the available capacity for the Thin Provisioning volumes mapped to this
pool.
TP_CAP(MB): Displays the total capacity of the Thin Provisioning pool.
W(%): Displays the threshold value for WARNING set for this Thin Provisioning pool.
H(%): Displays the threshold rate set for the Thin Provisioning pool as high water mark.
Num: Displays the number of LDEVs configured the Thin Provisioning pool.
LDEV#: Displays the first number of LDEV configured the Thin Provisioning pool.
LCNT: Displays the total number of Thin Provisioning volumes mapped to this Thin Provisioning
pool.
TL_CAP(MB): Displays the total capacity of all Thin Provisioning volumes mapped to this Thin
Provisioning pool.
horcmstart
The horcmstart command is a script that starts HORCM. This script also sets the environment
variables for HORCM as needed (for example, HORCM_CONF, HORCM_LOG, HORCM_LOGS).
Syntax
horcmstart.sh { inst ... } (UNIX systems)
horcmstart.exe { inst ... } (Windows systems)
horcmstart 95