HP XP7 Remote Web Console Messages (H6F56-96010)

Table 50 Error codes (part code 05205) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, contact HP Technical
Support.
An error occurred during SVP
processing.
05710105205
EIf this problem persists, contact HP Technical
Support.
An error occurred during SVP
processing.
05710205205
WRetry the operation. If this problem persists,
contact HP Technical Support.
The storage system is busy (internal
processing).
05845105205
EIf this problem persists, contact HP Technical
Support.
An error occurred on the DKC side.05857205205
WCheck if the DKCMAIN microcode and SVP
microcode versions are mismatched.
This function is not supported.05857305205
EIf this problem persists, contact HP Technical
Support.
An error occurred while connecting to
the storage system.
05857405205
EIf this problem persists, contact HP Technical
Support.
An error occurred while connecting to
the storage system.
05857505205
EIf this problem persists, contact HP Technical
Support.
A communication time-out error occurred
in the storage system.
05857605205
WSelect a different volume, and then retry the
operation.
The specified volume(s) are the leaf
volume(s) of Business Copy.
06543405205
WSelect a different volume, and then retry the
operation.
The specified volume(s) are already
being used as of THP V-VOL(s).
06567305205
WSelect a different volume, and then retry the
operation.
The specified volume(s) are already
being used as of THP V-VOL(s).
06567405205
WRetry the operation after the quickformat is
completed.
The volume specified as a migration
source cannot be used, because it is in
quick formatting.
06569705205
WRetry the operation after the quickformat is
completed.
The volume specified as a migration
target cannot be used, because it is in
quick formatting.
06569805205
WSelect a different volume, and then retry the
operation.
The volume specified as a migration
source cannot be used, because it is
06570005205
being used by FICON(R) Data
Migration.
WSelect a different volume, and then retry the
operation.
The volume specified as a migration
target cannot be used, because it is
06570105205
being used by FICON(R) Data
Migration.
WSelect a different volume, and then retry the
operation.
The specified volume cannot be moved
because it is a Thin Provisioning volume
that is not associated with a pool.
06570505205
WSelect a different volume, and then retry the
operation.
The specified volume cannot be moved
because it is a Thin Provisioning volume
that is not associated with a pool.
06570605205
WCheck the setting of the specified volume.Migration cannot be performed because
the Thin Provisioning volume that is the
06570805205
migration source and the Thin
Provisioning volume that is the migration
target are contained in the same pool.
136 Message (part code group 05nnn)