HP XP7 Remote Web Console Messages (H6F56-96010)

8 Message (part code group 06nnn)
This chapter includes the error messages with the part code 06005 to 06810.
Part code 06005
Table 56 Error codes (part code 06005)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
00501306005
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
00509906005
WRefresh the window, and then retry the operation.
If this problem persists, contact HP Technical
Support.
This function does not support the
specified port.
00514506005
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
00600006005
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
00601206005
WIf the same problem persists despite retrying,
please contact HP Technical Support.
The SVP is busy. Please wait for a while,
and then retry the operation.
00602306005
WVerify and correct the error in the other setting,
and then retry the operation.
The setting cannot be applied because
there is an error in a different setting.
00653706005
WVerify that all of the settings have been applied.
Retry the setting on the items that are not applied
Time out error.00800006005
if there is any. If this problem persists, contact HP
Technical Support.
WVerify that all of the settings have been applied.
Retry the setting on the items that are not applied
Time out error.00800106005
if there is any. If this problem persists, contact HP
Technical Support.
WRetry the operation. If this problem persists,
contact HP Technical Support.
The operation cannot be performed, or
a communication time-out error occurred.
00810006005
WVerify that the pair status has been changed. If
the status is not changed, verify the local storage
The storage system has accepted the
request normally, but the pair status
change requires some time.
00810406005
system or remote storage system configuration
and the condition of the paths between the local
storage system and the remote storage system. If
this message is displayed after the Create Pairs
or Resync Pairs operation, perform the Split Pairs
operation for the pair in the Copy status, and then
perform the Resync Pairs operation.
WRetry the operation.Please retry operation.00870006005
WVerify the remote path status. For use by an open
system, verify that a path whose connection type
is System is registered.
The remote path between the local
storage system and the remote storage
system is not active.
00870106005
WWait for a while, and then retry the operation.The status of the primary volume is not
valid.
00870206005
WVerify the number of normal remote paths.The specified number of remote paths is
less than the minimum number of paths.
00870306005
148 Message (part code group 06nnn)