HP XP7 Remote Web Console Messages (H6F56-96010)

Table 58 Error codes (part code 06505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WVerify the access attribute of the specified
secondary volume.
The specified secondary volume cannot
be used because of the access attribute
changed by Data Retention.
00894406505
WRelease the setting of the external volume, then
retry the operation.
The external volume that is mapped to
an internal volume is connected to the
port.
00894706505
WStop the I/O operations, and then retry the
operation.
The specified port is receiving I/O
requests.
00894806505
EVerify the SSB log, and then contact HP Technical
Support.
An internal error occurred.00894906505
EVerify the SSB log, and then contact HP Technical
Support.
An internal error occurred.00895006505
WVerify the status of the specified secondary
volume.
The Create Pairs operation cannot be
performed because the specified
00897706505
secondary volume is used by Flex Copy
XP.
WVerify the licensed capacity of System Array
Management on the remote storage system. To
The pair operation cannot be performed
because the licensed capacity of System
00898006505
perform this operation, purchase a license key
that allows you to use a larger capacity.
Array Management on the remote
storage system exceeds the maximum.
ESelect another window. If you want to set this
function, please contact your administrator.
This function cannot be used by the
storage partition administrator.
05652406505
WWait for a while, and then retry the operation. If
this problem persists, contact HP Technical
Support.
The Assign Remote Command Devices
operation cannot be performed due to
a temporary path failure.
05653506505
WReduce the number of requests to be processed
at one time, and then retry the operation.
Too many requests.05800506505
WVerify the specified LDEV ID.Invalid parameter (LDEV ID).05800606505
WVerify whether;The parameter (Journal ID) is not valid
or the specified journal is not registered.
05800706505
• the specified journal ID is correct, and
• the specified journal is registered.
EIf this problem persists, contact HP Technical
Support.
The command was rejected by the
storage system because the command
is unknown.
05800806505
WReduce the number of registered remote storage
systems, and then retry the operation.
No more remote storage systems can be
registered.
05800906505
WCheck the specified path group ID.Invalid parameter (path group ID).05801006505
WRefresh the window, and check the mirror status
of the journal.
The specified operation failed due to the
mirror status of the journal.
05801106505
WCheck the specified number of initial copy
activities.
Invalid parameter (number of initial copy
activities).
05801206505
WCheck the status of the specified volume.The specified volume does not exist or
is unusable.
05801306505
EIf this problem persists, contact HP Technical
Support.
Pinned slot(s) exists.05801406505
EIf this problem persists, contact HP Technical
Support.
The specified volume is blocked.05801506505
174 Message (part code group 06nnn)