HP XP7 Remote Web Console Messages (H6F56-96010)

Table 58 Error codes (part code 06505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WVerify the status of the specified journal.The parameter related to the inflow
cannot be changed, because the status
05833406505
of the specified journal is neither "Initial"
nor "Stopped".
WVerify the status of the specified journal.The timer type cannot be changed,
because the status of the specified
journal is not "Initial".
05833506505
WCheck the CLPR number of the registered journal
volume, and specify the volume that has the same
CLPR number.
The specified volume cannot be
registered as a journal volume because
the CLPR number of the specified volume
05833606505
is different from the CLPR number of the
journal volume that has already been
registered.
WCheck the CLPR number of the journal volume in
the specified master journal, and then select a
volume that has the same CLPR number.
The operation cannot be performed
because the CLPR number of the volume
specified as the primary volume is
05833706505
different from the CLPR number of the
journal volume in the specified master
journal.
WCheck the CLPR number of the journal volume in
the specified master journal, and then select a
volume that has the same CLPR number.
The operation cannot be performed
because the CLPR number of the volume
specified as the secondary volume is
05833806505
different from the CLPR number of the
journal volume in the specified restore
journal.
WCheck the specified volume and specify a
non-external volume.
The specified volume cannot be used as
a journal volume because the specified
volume is an external volume.
05834106505
WCheck the setting of the volume in the Data
Retention window or the Volume Retention
window.
The specified volume cannot be used as
a journal volume because of a Data
Retention setting or a Volume Retention
setting.
05834206505
WCheck the setting of the specified volume in the
Volume Security window.
The specified volume cannot be used as
a journal volume because of a Volume
Security setting.
05834306505
WVerify whether the IO suppression mode of the
specified secondary volume is enabled from the
The Create Pairs operation cannot be
performed due to one of the following
reasons:
05834506505
External Storage window. If the IO suppression
mode is disabled, take a note of the DKCMAIN
• The IO suppression mode of the
specified secondary volume is
enabled.
microcode version of the remote storage system,
and then contact HP Technical Support.
• The microcode version of the
secondary storage system does not
support external volumes.
WVerify the settings of the volume specified as the
secondary volume from the Data Retention
window.
The Create Pairs operation cannot be
performed because VMA of Data
Retention is set on the volume specified
as the secondary volume.
05834606505
WVerify the settings of the volume specified as the
secondary volume from the Volume Security
window.
The Create Pairs operation cannot be
performed because Volume Security is
set on the volume specified as the
secondary volume.
05834706505
182 Message (part code group 06nnn)