HP XP7 Remote Web Console Messages (H6F56-96010)

Table 58 Error codes (part code 06505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
because the attribute of the specified
journal is invalid.
WCheck if the specified command device exists in
the device of specified serial number.
Journals cannot be added to the
extended consistency group (EXCTG),
05862406505
because the combination of the serial
number and the command device is
invalid.
WCheck if the specified journal is being used by
other program product you are using.
Journals cannot be added to the
extended consistency group (EXCTG),
05862506505
because the specified journals are being
used by another program product.
WCheck the status of the command device.The specified operation failed because
the command device was not registered
or has been blocked.
05862706505
WCheck the attribute of the journals in the specified
extended consistency group(EXCTG).
Journals cannot be added to the
specified extended consistency group
05862806505
(EXCTG), because different journal
attributes coexist in the EXCTG.
WIf this problem persists, contact HP Technical
Support.
The specified operation failed because
of a temporary path failure.
05862906505
WConfirm whether the specified volume is set by
Cache Residency or Cache Residency Z.
The specified volume cannot be used as
a journal volume because the volume is
05864106505
set by Cache Residency or Cache
Residency Z.
WVerify the DKCMAIN microcode version of the
remote storage system, and contact HP Technical
The operation cannot be performed
because Continuous Access Journal or
05868306505
Support to verify that Continuous Access JournalContinuous Access Journal Z of the
or Continuous Access Journal Z supports the delta
resync function.
remote storage system does not support
the delta resync function.
WVerify the status of the specified primary volume
from the Continuous Access Synchronous or
Continuous Access Synchronous Z window.
The operation to change the status to the
status ready for Delta resync failed. The
specified primary volume should meet
the following requirements.
05868406505
• The specified volume is a secondary
volume for Continuous Access
Synchronous, or Continuous Access
Synchronous Z.
• The pair status of Continuous Access
Synchronous, or Continuous Access
Synchronous Z is PAIR or Duplex.
WVerify that the specified primary volume applies
to the followings:
The delta resync operation cannot be
performed because the specified primary
volume is not a data volume of
05868506505
• The volume is a primary volume of a
synchronous pair and the pair status is PAIR
Continuous Access Synchronous or
Continuous Access Synchronous Z, or
or Duplex on the Continuous Access
the pair status of the primary volume is
invalid.
Synchronous window, the Continuous Access
Synchronous Z window, RAID Manager, or
Business Continuity Manager.
• The volume is a secondary volume of a
synchronous pair and the pair status is SSWS
or Swapping on RAID Manager or Business
Continuity Manager.
Part code 06505 189