HP XP7 Remote Web Console Messages (H6F56-96010)

Table 62 Error codes (part code 07005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WDelete the Remote Copy pair.You cannot create the new pair, because
a remote copy pair exists in the same
storage system frame.
00850307005
WVerify the composition, the status, or the volume
status of the pair. See the Business Copy User
The command could not be executed.00850407005
Guide for the relation between the composition
of the pair, status of the pair, or the volume status
of the pair and those operations.
ESee the section "Operations permitted for L1, L2
pairs" in the Business Copy User Guide or the
The command has been rejected,
because the operation cannot be
accepted in the current pair status.
00850507005
relation between the status of pairs and the
commands that can be accepted.
WVary the secondary volume offline from the host,
and then retry the operation.
The command cannot be run because
the specified secondary volume is used
by the host.
00850607005
WThe Pairsplit command cannot be run because
the pair is already in the PSUS status.
The Pairsplit (Split Pairs) command was
issued to the pairs in a PSUS status.
00850707005
WThe Paircreate command cannot be run because
the pair is already in the PSUS status.
The Paircreate (Create Pairs) command
was issued to the pairs in the PSUS
status.
00850807005
WVerify the settings, and then retry the operation.The Pairsplit (Split Pairs) command with
the QUIESCE specification was issued
to a secondary boot device.
00850907005
WVerify the settings, and then retry the operation.The P-VOL Suspend command was
issued to a secondary boot device.
00851007005
WDetach the S-VOL from the host, or delete the
Remote Copy path.
Cannot perform Pairresync (Resync Pairs)
or Pairsplit-E (Suspend Pairs) operation
because of the path group setting.
00851207005
WRun the vary offline command to disable the
primary volume from the mainframe host, and
then retry the operation.
The command could not be executed
because the specified primary volume is
used by the host.
00851307005
WVerify the settings, and then retry the operation.The number of P-VOL cylinders exceeds
the maximum.
00851607005
WVerify the settings, and then retry the operation.The number of S-VOL cylinders exceeds
the maximum.
00851707005
WCheck if the specified emulation type is the same
or not.
You cannot create a pair because the
track format is different.
00851807005
WSpecify volumes with the same capacity.The capacities of the volumes specified
as the primary volume and the
secondary volume do not match.
00851907005
WSelect volumes with the same emulation type, and
then retry the operation.
The pair cannot be created because the
volume types are different.
00852007005
WVerify the settings, and then retry the operation.The number of multiple copy jobs
exceeded the maximum.
00852107005
WSpecify the emulation type supported in HOMRCF.The emulation type of the P-VOL is not
supported.
00852207005
WSpecify the emulation type supported in HOMRCF.The emulation type of the S-VOL is not
supported.
00852307005
208 Message (part code group 07nnn)