HP XP7 Remote Web Console Messages (H6F56-96010)

Table 62 Error codes (part code 07005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, contact HP Technical
Support.
An error occurred during SVP
processing.
05710107005
EIf this problem persists, contact HP Technical
Support.
An error occurred during SVP
processing.
05710207005
WSelect a different volume or release the
consistency group setting.
The command has been rejected
because the cascade request for creating
05800007005
cascade pairs composed of volumes
belonging to the same consistency group
was issued.
WWait until the L1 pair is in the PSUS or PAIR
status, and then retry the operation.
The operation of the L2 pair failed
because the L1 pair was in
05800107005
COPY(SP)/COPY status,
PSUS(SP)/COPY status or
COPY(RS-R)/RCPY status.
WThe quick restore operation cannot be performed
when the pair is composed of a normal volume
The Quick Restore command has been
rejected because the specified pair is
05800207005
and a customized volume (CV). Select a different
pair.
composed of a normal volume and a
customized volume (CV).
WTo continue the operation, delete the remote copy
pair.
The command has been rejected
because a Remote Copy pair exists in
the same storage system frame.
05800307005
WThe requested operation cannot be performed.
Check the status of the specified volume.
The command has been rejected
because the issued request is an
05800407005
operation that cannot be performed with
a volume that can be used from either
the mainframe or open-system hosts.
WDelete the remote replication pair or perform the
operation on other pairs.
The Quick Restore command could not
be executed because the specified pair
05825907005
contains external volumes and also is
used as a remote replication pair.
WThe requested command cannot be executed in
the current Continuous Access Synchronous pair
The command was rejected because the
specified P-VOL is used as a P-VOL of a
Continuous Access Synchronous pair.
05826007005
status. See the Business Copy User Guide for the
relation between the Continuous Access
Synchronous pair statuses and the Business Copy
operations.
WThe requested command cannot be executed in
the current status of Continuous Access
The command has been rejected,
because the specified P-VOL is used as
05826107005
Synchronous pair. See the section "SharingS-VOL of Continuous Access
Synchronous pair. Business Copy volumes" in the Business Copy
User Guide for the relation between the state of
Continuous Access Synchronous pair and the
Business Copy operations.
iAdd sufficient shared memory to create a pair.A pair cannot be created because
shared memory for differential tables is
in sufficient.
05826207005
WCheck the requirements for using the volume with
Continuous Access Journal.
The operation failed because the
specified P-VOL was a data volume of
Continuous Access Journal.
05829907005
Check the requirements for using the
volume with Continuous Access Journal.
Part code 07005 215