HP XP7 Remote Web Console Messages (H6F56-96010)

Table 62 Error codes (part code 07005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WRelease the Fast Snap pair setting or specify
another volume.
The operation cannot be done because
the specified secondary volume is a
secondary volume of Fast Snap.
07814207005
WSpecify another snapshot number or release the
Fast Snap pair setting.
The specified snapshot number is used
in another pair of Fast Snap.
07814307005
WInstall additional license keys to expand the
license capacity of the program product.
The operation cannot be done because
the license capacity has been exceeded.
07814407005
WMake sure that the specified volume is in a Fast
Snap pair, or select a different volume that is in
a Fast Snap pair.
The command was rejected because a
command except the paircreate
command was issued to a volume of
other than the Fast Snap pair.
07814507005
WVerify the status of the selected pair.The operation could not be performed
because of the pair status.
07814607005
WSpecify a Snapshot pool.A pair could not be created because a
pool other than the pool type of
Snapshot was specified.
07814707005
WRelease the secondary volume unavailable setting,
and then retry the operation.
The command was rejected because the
specified volume was set unavailable to
specify as a secondary volume.
07814807005
WPerform one of the following, and then retry the
operation.
An error occurred during Fast Snap
operations due to one of the following
reasons:
07814907005
• Specify another LDEV number.
• The LDEV number specified for the
primary volume or secondary volume
is wrong.
• Verify the status of the specified pair.
• Specify another MU number.
• Verify the status of the specified pool.
• The LDEV specified as the primary
volume or secondary volume is not
paired.
• Verify the license capacity of the Snapshot.
• See the section "Planning number of Snapshot
pairs" in the Snapshot User Guide for the
• The pair status of the specified
primary volume or secondary volume
is wrong.
relation between the number of pairs that can
be created and the shared memories.
• The specified Snapshot ID (MU
number) is wrong.
• The specified Snapshot ID (MU
number) is already used.
• The specified pool is not in a usable
status.
• The license capacity has exceeded
the maximum.
• The control table for Fast Snap or
Snapshot is depleted.
WInstall the necessary program product.The command was rejected because the
program product of Fast Snap or
Business Copy was not installed.
07815007005
WAdd sufficient shared memory.The command was rejected because the
shared memory (FC, TPF, or Extension1)
of necessary capacity was not installed.
07815107005
WAdd sufficient shared memory.The command was rejected because the
shared memory (SS1 or more) of
necessary capacity was not installed.
07815207005
Part code 07005 221