HP XP7 Remote Web Console Messages (H6F56-96010)

Table 64 Error codes (part code 07105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe SI Operation for FICON(R) Data Migration
cannot be performed in the current pair
The SI Operation for FICON(R) Data
Migration failed because the specified
06876707105
configuration. Select FICON(R) Data Migrationpair consists of either a primary volume
source volume for the primary volume and otherother than a FICON(R) Data Migration
than FICON(R) Data Migration source volume for
the secondary volume.
source volume or a secondary volume
that is a FICON(R) Data Migration
source volume.
WThe SI Operation for FICON(R) Data Migration
cannot be performed in the current pair status.
The SI Operation for FICON(R) Data
Migration failed, because the pair status
06876807105
Change the status of the pair to SIMPLEX or
DUPLEX, and then retry the operation.
of the specified pair was not SIMPLEX
or DUPLEX.
WThe SI Operation for FICON(R) Data Migration
cannot be performed in the current pair status.
The SI Operation for FICON(R) Data
Migration failed, because the pair status
06876907105
Change the status of the pair to Suspend(Mig.),
and then retry the operation.
of the specified pair was not
Suspend(Mig.).
WRelease the Cache Residency Z setting in the
T-VOL.
The SI Operation for FICON(R) Data
Migration failed because the Cache
06877007105
Residency Z setting was set in the T-VOL
of the specified pair.
WRelease the Volume Retention setting in the T-VOL
or specify another volume, and then retry the
operation.
The SI Operation for FICON(R) Data
Migration failed, because the Volume
Retention setting was set in the T-VOL of
the specified pair.
06877107105
WDelete the Continuous Access Journal Z pair, or
select a different volume, and then retry the
operation.
The SI Operation for FICON(R) Data
Migration failed because the T-VOL of
the specified pair was used by
Continuous Access Journal Z.
06877207105
WDelete the Continuous Access Synchronous Z pair
or specify another volume, and then retry the
operation.
The SI Operation for FICON(R) Data
Migration failed, because the T-VOL of
the specified pair was used by
Continuous Access Synchronous Z.
06877307105
WExternal Storage volume cannot be used as a
T-VOL. Specify another volume.
The SI Operation for FICON(R) Data
Migration failed, because the T-VOL of
06877407105
the specified pair was used by External
Storage.
WThe specified operation cannot be performed in
the current pair configuration. Select volumes
The command could not be executed
because the primary volume of the
06877507105
other than FICON(R) Data Migration sourcespecified pair is a FICON(R) Data
Migration source volume. volume for the primary volume, and then retry the
operation.
WThe specified operation cannot be performed in
the current pair configuration. Select volumes
The command could not be executed
because the secondary volume of the
06877607105
other than FICON(R) Data Migration sourcespecified pair is a FICON(R) Data
Migration source volume. volume for the secondary volume, and then retry
the operation.
WThe specified operation cannot be performed for
FICON(R) Data Migration source volume. Select
The command has been rejected,
because the specified volume is a
06877707105
a volume other than FICON(R) Data Migration
source volume, and then retry the operation.
FICON(R) Data Migration Source
Volume.
WThe operation cannot be done because the
capacity of target volume changes. Verify the
The command was rejected because the
specified S-VOL(Primary Volume) was a
06880807105
capacity of the volume, and then retry the
operation.
Thin Provisioning Z volume whose
capacity was being added.
Part code 07105 239