HP XP7 Remote Web Console Messages (H6F56-96010)

Table 64 Error codes (part code 07105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe operation cannot be done because the
capacity of target volume changes. Verify the
The command was rejected because the
specified T-VOL(Secondary Volume) was
06880907105
capacity of the volume, and then retry the
operation.
a Thin Provisioning Z volume whose
capacity was being added.
WDelete the Continuous Access Synchronous,
Continuous Access Journal, or External Storage
The initialize function cannot be
performed, because a Continuous
06881407105
Access Manager pair that is using ThinAccess Synchronous, Continuous Access
Provisioning volumes, and then retry the
operation.
Journal, or External Storage Access
Manager pair contains Thin Provisioning
volumes.
WUse another CTG, or release the pair of Fast Snap
where the specified CTG is in use.
The command has been rejected,
because the specified CTG is used by
Fast Snap.
06883207105
WUse another CTG, or release the pair of Business
Copy where the specified CTG is in use.
The command has been rejected,
because the specified CTG is used by
Business Copy.
06883407105
WSpecify the volume not used as S-VOL of SI
Operation for FICON(R) Data Migration, or retry
the operation after deleting the current pair.
The SI Operation for FICON(R) Data
Migration failed, because more than one
T-VOL was assigned for the specified
S-VOL.
06885407105
WThe operation cannot be performed in the current
pair status of the Continuous Access Journal Z.
The specified S-VOL(Primary Volume) is
a volume of using two mirrors, which is
06892207105
See the section "Interoperability with otherincluded in the 3DC cascade or the 3DC
products and functions" in the Business Copy Zmulti-target configuration. The operation
User Guide for the relation between the pair statusfor this specified volume failed due to
the following reason.
• The specified volume is used by a
data volume of the Continuous
Access Journal Z.
of the Continuous Access Journal Z and the
Business Copy Z operations.
WThe operation cannot be performed in the current
pair status of the Continuous Access Journal Z.
The specified T-VOL(Secondary Volume)
is a volume of using two mirrors, which
06892307105
See the section "Interoperability with otheris included in the 3DC cascade or the
products and functions" in the Business Copy Z3DC multi-target configuration. The
User Guide for the relation between the pair statusoperation for this specified volume failed
due to the following reason.
• The specified volume is used by a
data volume of the Continuous
Access Journal Z.
of the Continuous Access Journal Z and the
Business Copy Z operations.
WSpecify a different volume.The specified volume is a volume of
using two mirrors, which is included in
06892407105
the 3DC cascade or the 3DC multi-target
configuration. The operation for this
specified volume failed due to the
following reason.
• The specified volume is used by a
data volume of the Continuous
Access Journal Z.
WAssociate the specified Thin Provisioning Z volume
with a pool, and then retry the operation.
The command was rejected, because
the Thin Provisioning Z volume specified
07500207105
as S-VOL(Primary Volume) was not
associated with a pool.
WAssociate the specified Thin Provisioning Z volume
with a pool, and then retry the operation.
The command was rejected, because
the Thin Provisioning Z volume specified
07500307105
240 Message (part code group 07nnn)