HP XP7 Remote Web Console Messages (H6F56-96010)

Part code 08507
Table 69 Error codes (part code 08507)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf the same problem persists despite retrying,
please call HP Technical Support.
An error occurred during SVP
processing.
00601208507
EIf the same problem persists despite retrying,
please call HP Technical Support.
An error occurred during SVP
processing.
00707008507
EIf the same problem persists despite retrying,
please call HP Technical Support.
An error occurred during SVP
processing.
00707108507
Part code 08521
Table 70 Error codes (part code 08521)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSelect one or more table rows.No parity group or virtual volume is
selected.
10500108521
WSelect one table row.No CLPR is selected.10500208521
Part code 08522
Table 71 Error codes (part code 08522)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSelect one table row.No table row is selected.10500108522
WSelect one or more table rows.No table rows are selected.10500208522
WVerify the setting of the CLPR name, and then retry
the operation.
A CLPR name is not entered or the
entered name is too long.
10500308522
WVerify the setting of the CLPR name, and then retry
the operation.
The specified CLPR name cannot be used
because it is reserved by the system.
10500408522
WVerify the setting of Total Cache Size, and then
retry the operation.
The value set for Total Cache Size is
invalid.
10500508522
WVerify the setting of Resident Cache Size, and
then retry the operation.
The value set for Resident Cache Size is
invalid.
10500608522
WVerify the setting of Number of Resident Extents,
and then retry the operation.
The value set for Number of Resident
Extents is invalid.
10500708522
WVerify the setting of the CLPR name, and then retry
the operation.
The same CLPR name already exists.10500908522
WVerify the setting of Initial Number, and then retry
the operation.
The value of Initial Number is not
entered.
10501108522
WDelete the cache residency setting on the LDEV,
and then retry the operation.
A parity group that contains an LDEV
with a cache residency setting cannot
be migrated.
10501408522
WDelete unnecessary CLPRs, and then retry the
operation.
No more CLPRs can be created because
the number of CLPRs that can be created
has reached the maximum.
10501708522
248 Message (part code group 08nnn)