HP XP7 Remote Web Console Messages (H6F56-96010)

Table 82 Error codes (part code 09605) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during array controller
processing.
00602309605
If this problem persists, please contact
HP Technical Support.
EIf the problem persists despite retrying, please
contact HP Technical Support.
The mistake is found in the set
parameter.
00603809605
WWait for a while, then retry the operation.Processing in progress.00650209605
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
00653309605
WCheck the error factor in the others settings.The setting process has not been
executed because there is no error in
00653709605
this setting, but an error in the others
settings.
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
00706009605
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
00711109605
EIf the problem persists despite retrying, please
contact HP Technical Support.
This error code is not registered.00731009605
EWait for a while, then retry the operation.An error occurred while connecting to
the storage system. Please retry a little
later.
00800109605
EWait for a while, then retry the operation.A communication time-out error occurred
in the storage system. Please wait for a
while, and then retry the operation.
00800209605
EMicrocode versions of DKCMAIN and SVP may
not match each other. Verify the microcode
versions.
This function is not supported.00810209605
WSpecify an open-system volume.The specified logical volume does not
exist.
00812009605
WVerify the logical volume, and then retry the
operation.
This logical volume is busy.00812209605
EMicrocode versions of DKCMAIN and SVP may
not match each other. Verify the microcode
versions.
This function is not supported.00812309605
WSpecify an open-system volume.This logical volume is a mainframe
volume.
00812409605
WReview LDEV information, then retry.The attribute of the logical volume has
been changed by RAID Manager.
00812509605
WVerify the logical volume, and then retry the
operation.
This logical volume is configured as a
command device.
00812609605
EIf the problem persists despite retrying, please
contact HP Technical Support.
A parameter error occurred.00812809605
EIf the problem persists despite retrying, please
contact HP Technical Support.
This error code is not registered.00813209605
ETo change the attribute, please contact HP
Technical Support.
The attribute of this logical volume
cannot be changed to Read/Write.
00813409605
258 Message (part code group 09nnn)