HP XP7 Remote Web Console Messages (H6F56-96010)
Table 82 Error codes (part code 09605) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
05842209605
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
05842309605
ERestore the blockade status of the logical volume.The specified logical volume is blocked.05842409605
WMake the setting to another logical volume.The protection period is set to this logical
volume.
05842909605
WWait for a while, then retry the operation.This logical volume is busy.05843409605
WVerify the logical volume, and then retry the
operation.
This logical volume is busy.05843509605
WSee the Data Retention Utility window and check
the following about the logical volume you have
selected.
The access attribute of the logical volume
has already been changed.
05843609605
• The access attribute must be Read/Write
• The logical volume must be able to be
specified as an S-VOL
• You must be able to set a path to the logical
volume using the RAID Manager or Remote
Web Console
• No mode is set using the RAID Manager
WVerify the logical volume, and then retry the
operation.
This logical volume is configured as a
command device.
05843809605
WSelect a logical volume whose emulation type is
OPEN-V.
The emulation type of the logical volume
is not OPEN-V.
05844209605
WRetry the operation after the logical volume has
recovered from the blocked status or after the
LDEV has been formatted or shredded.
The specified logical volume is blocked,
or the LDEV is being formatted or
shredded.
05844809605
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
05845009605
WLog out, and then log back in with access to the
resource group containing the specified LDEV.
The specified LDEV belongs to a
resource group that you do not have
permission to access.
07501509605
WVerify the available LDEVs.The setting operation cannot be done
because all LDEVs allocated to the
07651409605
resource group have no access right for
the resource group.
Part code 09610
Table 83 Error codes (part code 09610)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
00706009610
WIf the problem persists despite retrying, please
contact HP Technical Support.
There is an invalid value in the Volume
Retention information.
00744209610
WMount volumes, then retry the operation.There is no valid volume.00811209610
260 Message (part code group 09nnn)