HP XP7 Remote Web Console Messages (H6F56-96010)

Part code 10122
Table 87 Error codes (part code 10122)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
ERetry the operation. If this problem persists,
contact HP Technical Support.
An error occurred while formatting.10519410122
ERetry the operation. If this problem persists,
contact HP Technical Support.
An error occurred while preparing the
quick format.
10519510122
WRelease the selected encryption key that is not
created.
The specified encryption key cannot be
deleted because it is not created.
10519610122
WSelect a different encryption key that is not used.The specified encryption key cannot be
deleted because it is already used.
10519710122
WInstall the program product, or log out and then
log back in with permission to edit.
The operation cannot be performed
because the program product is not
10520410122
installed or you do not have permission
to edit.
WVerify the settings.There is no parity group available for
making or releasing encryption settings.
10523510122
WVerify the settings.Format Type is not selected.10523710122
WVerify the settings.The encryption settings have not
changed.
10523910122
WVerify the settings.The selected parity group is not blocked.10524010122
WVerify the settings.The encryption cannot be set for the
specified parity group because it is for
an external volume.
10527610122
iContinue the operation.Completed successfully.10546110122
WSet up the key management server.The key management server is not set.10546210122
WVerify the settings.Invalid port number.10546310122
WVerify the settings.Invalid time-out value.10546410122
WVerify the settings.Invalid retry interval.10546510122
WVerify the settings.The number of retries is invalid.10546610122
WVerify the settings.The password cannot be entered.10546710122
WEnable the key management server.The key management server is disabled.10547010122
WVerify the configuration of the encryption keys.There are no encryption keys already
created.
10547110122
WSet each value so as to have the total to be within
the maximum.
The total of the entered values exceeds
the maximum.
10548010122
WVerify the Total column in the password policy
table.
The value in the Total column was
updated because the total of the
10548110122
respective minimum number of
characters below exceeded the value in
the Total column.
• Numeric Characters (0-9)
• Uppercase Characters (A-Z)
• Lowercase Characters (a-z)
• Symbols
Part code 10122 263