HP XP7 Remote Web Console Messages (H6F56-96010)
Table 31 Error codes (part code 01005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
Invalid host mode.00102201005
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
Invalid Fibre address.00102301005
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
Invalid Fibre topology information.00102401005
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
Error happened before the change was
processed. The specified LU path does
not exist.
00102501005
WCheck the specified content, and retry.LUN security setting has been made to
a non-Fibre port. LUN security is a
function of LUN Manager.
00105901005
WFirst, add paths, then click Apply. Next, turn off
the security switch, then click Apply.
Security Switch Off operation and path
adding operation cannot be performed
simultaneously.
00106101005
WCorrect the specified contents, and request the
setting of the configuration information again.
The specified WWN is already in use.00106301005
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
You are trying to register the same
WWN that is already registered.
00106401005
WCorrect the specified contents, and request the
setting of the configuration information again.
The specified host name or the host
group name is already registered. (The
00106501005
host name and the host group name
cannot be the same.)
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
The unregistered WWN number is
specified. (When deleting or changing)
00106601005
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
You are trying to register the same host
group number as the already registered
one.
00106701005
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
Error happened before the change was
processed. The specified host group has
not been registered.
00106801005
WSpecify a different volume, and then retry the
operation.
The following volumes cannot be
specified to change the path
configuration:
00110801005
• A volume other than the open-system
volume (including an unmounted
volume).
• A volume that is used by Auto LUN.
WSpecify a different volume, and then retry the
operation.
Invalid characters are specified in the
nickname to be used in HOST GROUP
and WWN.
00111001005
WSpecify a different volume, and then retry the
operation.
When requesting a configuration change
of LUN-Security, a nickname is not
00111101005
specified. Specify the nickname of HOST
GROUP.
62 Message (part code group 01nnn)