HP XP7 Remote Web Console Messages (H6F56-96010)

Table 36 Error codes (part code 03005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WInstall the required program product.This function is not available. DKA
Encryption is required.
10710303005
EIf this problem persists, contact HP Technical
Support.
A parameter error occurred on the
storage system.
10810003005
WVerify the setting.The number of created keys exceeds the
maximum.
10810203005
WSpecify a free key.The key cannot be deleted.10810303005
WCreate free keys.There are not enough free keys.10810403005
EContact HP Technical Support to have the
blockage restored.
Some blocked parts exist because an
error occurred on the DKC side.
10810603005
EContact HP Technical Support to have the
blockage restored.
Some blocked parts exist because an
error occurred on the DKC side.
10810703005
WBlock all of the specified parity groups, and then
retry the operation.
An error occurred on the DKC side. A
parity group that is not blocked is
included in the specified parity groups.
10810803005
WDisable the encryption settings for the parity
group, and then retry the operation.
An error occurred on the DKC side. The
encryption environmental settings cannot
10810903005
be initialized because there is an
encrypted parity group.
WInitialize the encryption environmental settings,
and then retry the operation. If this problem
persists, contact HP Technical Support.
An error occurred on the DKC side
during the encryption environmental
settings.
10811003005
WContact HP Technical Support to have the
blockage restored. After that initialize the
Some blocked parts exist because an
error occurred on the DKC side during
the encryption environmental settings.
10811103005
encryption environmental settings, and then retry
the operation.
EContact HP Technical Support to have the
blockage restored. After that initialize the
The specified operation cannot be
performed because the SAS controller
is blocked.
10811203005
encryption environmental settings, and then retry
the operation.
EInitialize the encryption environmental settings,
and then retry the operation. If this problem
persists, contact HP Technical Support.
An error occurred during SVP
processing.
10811303005
WSpecify a supported relocation speed, and then
retry the operation. If this problem persists, contact
HP Technical Support.
An invalid relocation speed was
specified.
20800003005
WVerify the device configuration of the storage
system.
The tier with heavy I/O load exists in
the monitoring pool.
20800103005
WRelease the journal volume setting.The zero page reclamation cannot be
performed because the specified Thin
20800203005
Provisioning virtual volume is used as a
journal volume.
WWait until the configuration change is complete,
and then retry the operation.
The capacity of the specified Thin
Provisioning virtual volume cannot be
20800303005
expanded because the journal volume
configuration is changing.
WContact HP Technical Support.To use a pool with the Smart Tiers
function enabled, it is required to install
the additional shared memory.
20800603005
Part code 03005 97